Plow disk...where to get?

[175gr7.62]

Where can I order a raw plow disk?


Sent from my iPhone using Tapatalk

[Texans42]

Agrisupply

[Smokeater]

Tractor Supply

If there's any big farming operations around, check in with em and see if they've changed any out.

[Hunter_Man]

Agrisupply is where I ordered my replacements. Be sure to measure the inside square hole There are many different sizes.

[Worksalot]

Shoup in Kankakee, Illinois has a big supply to order from.

[clay4626]

are you wanting it to put on a disk or for a cooker
as said before if it is for a replacement disk get one that will fit your
brand of disk. if you have a tractor dealer close to you they could help you
if you have the old one off take it with you them you will get the right one

[DRT]

Scrap metal yards sometimes have old ones.

Sent from my SM-J710MN using Tapatalk

[175gr7.62]

I should have clarified. I want to built a cooker.


Sent from my iPhone using Tapatalk

[Texans42]

I should have clarified. I want to built a cooker.


Sent from my iPhone using Tapatalk

Argisupply, when I change mine out there isn’t much left, so id go with new if I was you

[Quackerbox]

I bought one from tsc. I remember the Pakistani metal being a pia to weld

Sent from my SM-G930V using Tapatalk

[boh347]

If you have a Cisco equipment I’ve bought brand new solid ones from them.

https://m.ebay.com/sch/i.html?_from=R40&_trksid=p2056088.m4084.l1311.R1.TR11.TRC2.A0.H0.Xplow+dis.TRS0&_nkw=plow+disc&_sacat=0

[clay4626]

if you could find a turning plow disk would be what you are looking for
24 inch disk blades are about as big as you can find. the old turning plow disk are a lot bigger and have a bigger curve to them

[.243 WSSM]

I am impressed you drove from deep east tx to Crowell for a while. That drive would have killed me twice-once going thru big D and again in fote woth. It's bad enough driving 3hrs to Crowell from here