ANOTHER metal building thread...

[wlgorman]

Been wanting a shop for a couple yrs now. Looks like we waited too long. Tariffs and whatnot have shot the prices up bigtime.

Went to Mueller in Ennis last week w the wife to price a 30x40 w 2 roll ups and a man door. I think it was 10' eave height, maybe 12.

Materials only around 20-25k. That seems outrageous.

Was supposed to get a formal quote from the salesman we talked to, but never got it.

Does that sound right and does anyone have a recommendation for another supplier?

Sent from my SM-G955U using Tapatalk

[blntrey3]

Been wanting a shop for a couple yrs now. Looks like we waited too long. Tariffs and whatnot have shot the prices up bigtime.

Went to Mueller in Ennis last week w the wife to price a 30x40 w 2 roll ups and a man door. I think it was 10' eave height, maybe 12.

Materials only around 20-25k. That seems outrageous.

Was supposed to get a formal quote from the salesman we talked to, but never got it.

Does that sound right and does anyone have a recommendation for another supplier?

Sent from my SM-G955U using Tapatalk

Thats not way off for that size, was it only red iron?

[wlgorman]

Thats not way off for that size, was it only red iron?

Well. I guess. All materials aside from concrete.

Buddy said he paid like 9500 for the same setup, materials only about 18 months ago

Sent from my SM-G955U using Tapatalk

[tpack]

FYI.......This is a bid I was given about 10 months ago.(for reference only)

24' X 30' X 14' Enclosed Structure (24'3 X 30'3
Concrete)
Including - 1 - 16' X 86' Hipped 1:12 Shed Off (With
12" Concrete Curb)
GALVALUME PBR R-Panel 26 Gauge Roof
Sheeting
PAINTED (BASE) REVERSED PBU U-Panel
Sidewalls and Trim
1 - 10' Wide X 12' Height Roll-Up Door
2 - 3070 Standard Steel Walk-Through Door (4 1/4"
Jamb)
2 - 3030 Vinyl 400 Series Double-Paned Argon
Filled Low-E Windows
MATERIAL PKG MISC STEEL BUILDING PKG
INCLUDING STRUCTURAL STEEL, SHEET
METAL, TRIM & DOORS
1 14,202.93 14,202.93T
Labor Erection & Sheeting Costs
*Per Specs Stated Above*
1 7,060.00 7,060.00
Concrete 24'3 X 30'3 Concrete Slab - 733.5625 SQFT
* #3 rebar mat @ 16" O.C.
* Perimeter Beam w/ 2-#4 rebar
* Based on solid, level pad surface (+ or - 1/2" of
grade) 95%
compaction with crushed stone or select fill
* Based on $120 or less concrete
* Rock Clause: Price subject to change if
excessive rock is present
* Price subject to change if pump truck is needed
733.5625 5.75 4,217.98

62' LINEAR FEET of 12" Curb
* Based on $120 or less concrete
* Rock Clause: Price subject to change if
excessive rock is present
* Price subject to change if pump truck is needed
62 25.00 1,550.00
Other Addition of Electrical Lighting and Fixtures:
1 - Outdoor DAY/NIGHT Pole Light on Front
Endwall
8 - 8' Florescent Bar Lighting (Interior of Main)
2 - 8' Florescent Bar Lighting (Under Endwall
Shedoff)
2 - 8' Florescent Bar Lighting (Under RV Sidewall
Shedoff)
6 - 130 Plug-In Electrical Outlets
1- 240 Plug in Electrical Outlet
1 3,664.29 3,664.29T
Sales Tax 6.75% 1,206.04
Page 2
_____________________________________
All material is guaranteed to be as specified. All work to be completed in a substantial workman
like manner according to the specifications submitted, per standard practices. At contractors
discretion, any alteration or deviation from above specifications involving extra costs will become
an extra charge over and above the estimate. All agreements contingent upon strikes, accidents,
weather or delays beyond our control. Owner to carry fire, torando, and necessary insurance.
NOTE: This Estimate may be withdrawn if not accepted
within ____ days.



$31,901.24

[boh347]

Wow that’s crazy high. Send me an email and I can show you a quote of a 30x40x14 I bought a few weeks ago.

[metalmangeorge]

Our costs have already gone up 14% in the last month and we have increase letters from all of our suppliers saying there will be 15-25% more increases coming in the next month or two. Some steel companies are no long giving 30 day price guaranties. Even had one say that their prices were for day of quote only. We are already seeing shortages in Galvalume panels. I dont buy from them, but i have heard MBCI is not taking any new orders. And they are one of the biggest suppliers out there.
It is going to be a bumpy summer in the metal building world for sure.

[Dirtymike]

ANOTHER metal building thread...

Our quote was good for one week. 18k for 40x40x16 high with 20foot lean too on outside. 2 12x14 tool up doors, on 10x12 roll up and an entry door.




Sent from my iPhone using Tapatalk

[nursejenn]

We built a 24x50x16 Mueller building with 2 12x12 roll up doors and 1 wall through door. Building materials were $12,500 INSULATED back in November....


I'll PM you the # of the contractor we used...

Sent from my SM-G955U using Tapatalk

[josh3]

Been wanting a shop for a couple yrs now. Looks like we waited too long. Tariffs and whatnot have shot the prices up bigtime.

Went to Mueller in Ennis last week w the wife to price a 30x40 w 2 roll ups and a man door. I think it was 10' eave height, maybe 12.

Materials only around 20-25k. That seems outrageous.

Was supposed to get a formal quote from the salesman we talked to, but never got it.

Does that sound right and does anyone have a recommendation for another supplier?

Sent from my SM-G955U using Tapatalk

I'd highly suggest you call Prime Metal Building Components in Dublin, TX. Ask for Austin Brown who is the owner and tell him Jeter told you to call him. He will take care of you.

[12RingKing]

2 years ago, 50x90 x14 with a few rollups and concrete under it was about 80k from Lewing in el campo. Had a quote the other day for same building, almost 100k

Absolute ridiculousness

[wlgorman]

We built a 24x50x16 Mueller building with 2 12x12 roll up doors and 1 wall through door. Building materials were $12,500 INSULATED back in November....


I'll PM you the # of the contractor we used...

Sent from my SM-G955U using Tapatalk

Please do

Sent from my SM-G955U using Tapatalk

[junkmanhunter]

Just got pricing on a 100'x50' with 16' walls,
20'x40 mezzanine decked with 3/4 T&G plywood
Covered lean to parking cover 50'x25' down one side and across the front 25'x25'
Sheet metal, trim and gutters with 2 -3'x7' doors, 4 - 3'x6' windows

Material and labor for $50K

[8mpg]

I agree it sounds very expensive. Was it weld up or bolt up? I hear bolt up can be quite a bit more.

Im going with a stick frame building and my lumber package is $14k. Its not a rectangle building but is 1850sqft.

[RDT]

I got a quote last week basic building 30x50 9500 12 ft eve
No extras like doors windows or insulation
i think ill run over there and put money down on it tomorrow

[Kingfisher789]

I'd build a block or semi block with 25k.