Texas Flag Table - Page 2 - TexasBowhunter.com Community Discussion Forums

kruppa24 · 06-12-2017, 07:33 AM

good work, looks nice

shark · 06-19-2017, 10:07 AM

Looks very nice. Good work.

Kevin Warren · 07-19-2017, 08:30 PM

I am out of cedar so I have not made anymore progress on the kitchen table. I could go get cedar from the locals but I am being a little picky on what cedar I use. The cedar that is on the Texas Flag table is from my uncle in Tennessee and it was mill cut by the Amish. I am headed back to Tennessee in August and will bring back a trailer load of cedar. So in the mean time I started one of our new end tables which is the Republic of Texas Flag. This table will also have the cedar wrapped around the edges but I am out of cedar. I will be making two more end tables, the Come And Take It Flag and the Dont Tread On Me Flag end tables. I also started the US Flag that I am donating to the K9 Officers Association.

Name: IMG_1219.jpg
Views: 958
Size: 62.6 KB

Name: IMG_1219.jpg
Views: 958
Size: 62.6 KB

Name: IMG_1220.jpg
Views: 962
Size: 104.4 KB

Name: IMG_1221.jpg
Views: 959
Size: 88.0 KB

Cheapsk8 · 07-19-2017, 08:36 PM

Very nice

mobrien · 07-19-2017, 10:04 PM

Awesome work there!

ThePumaLives · 07-21-2017, 05:55 PM

Awesome work!

vanmedic · 07-21-2017, 06:47 PM

Nice work

Kevin Warren · 07-21-2017, 08:54 PM

Thanks Everyone.

DUKFVR · 07-21-2017, 09:41 PM

That is Great work!

live2hunt65 · 07-22-2017, 07:28 AM

Nice

stickbowcoop · 07-22-2017, 07:39 AM

Very cool, you do nice work!

akstigo01 · 07-22-2017, 07:40 AM

May of been said but that could make a sweet poker table in a man cave.

Hotrodd · 07-22-2017, 07:50 AM

Loves it!

Kevin Warren · 08-19-2017, 10:17 PM

Finally made our trip to Tennessee to get the rest of the cedar that I needed to finish these tables. Epoxy clear on the top is the next step as soon as it arrives.

Name: IMG_1287.jpg
Views: 766
Size: 79.7 KB

Name: IMG_1287.jpg
Views: 766
Size: 79.7 KB

Name: IMG_1288.jpg
Views: 770
Size: 71.8 KB

Name: IMG_1289.jpg
Views: 768
Size: 80.3 KB

Name: IMG_1290.jpg
Views: 768
Size: 55.6 KB

Name: IMG_1291.jpg
Views: 769
Size: 69.0 KB

Name: IMG_1292.jpg
Views: 768
Size: 71.8 KB

jbowman612 · 08-19-2017, 10:19 PM

That is awesome!

tradtiger · 08-19-2017, 11:07 PM

Great work!

atomiclab · 08-21-2017, 07:15 AM

Quote:

Originally Posted by Kevin Warren

This would be nice for wall art. I make these in smaller versions as well. I have a US and a Texas flag made from whiskey barrel staves on my living room wall.

Attachment 857657

man, those are beautiful

Kevin Warren · 09-05-2017, 11:18 AM

Progress made this weekend. The high build epoxy stated that if I was not using a oil based stain then I may want to apply a coat of poly clear which is what i was going to do to the bottom and legs, and let dry for 48 hours. So here is the first coat of poly on both tables.

Name: IMG_1361.jpg
Views: 678
Size: 84.0 KB

Name: IMG_1361.jpg
Views: 678
Size: 84.0 KB

Name: IMG_1362.jpg
Views: 683
Size: 82.3 KB

Oldtimer11 · 09-08-2017, 06:54 AM

God bless Texas! Looks great brother

David DeAnda · 09-08-2017, 10:09 AM

Those are both awesome!

Quackerbox · 09-08-2017, 05:29 PM

Defineatly a difference in the cedar

Sent from my SM-G930V using Tapatalk

DoubleGProstaff · 09-11-2017, 07:21 AM

That's a good looking table

Sent from my iPhone using Tapatalk

Kevin Warren · 09-11-2017, 09:39 AM

Got the seal coat added to the small table. I will apply the flood coat some time this week if the love bugs die down some.

Name: IMG_1365.jpg
Views: 575
Size: 72.3 KB

Name: IMG_1365.jpg
Views: 575
Size: 72.3 KB

Name: IMG_1366.jpg
Views: 578
Size: 64.5 KB

1shot · 09-11-2017, 01:05 PM

I love both of those.

TXHUNT3R · 09-11-2017, 01:15 PM

Holy crap, those are amazing!

DoubleGProstaff · 09-11-2017, 05:16 PM

Looks amazing

Sent from my iPhone using Tapatalk

Kevin Warren · 09-12-2017, 06:39 AM

Thanks for the comments guys. This has been a slow project but will be well worth it once I am done. The epoxy coat process has been slow due to the swarm of love bugs lately.

stickfigure · 09-12-2017, 07:02 AM

Beautiful work

Kevin Warren · 11-13-2017, 06:03 AM

Progress finally made again. First coat of epoxy on the big table and final coat on my small table.

Name: IMG_1571.jpg
Views: 449
Size: 68.0 KB

Name: IMG_1572.jpg
Views: 448
Size: 56.6 KB

Iehooligan11b · 11-13-2017, 06:11 AM

Wow. Amazing work, Sir. Looks fantastic.

Mike D · 11-13-2017, 06:39 AM

Good Lord that’s amazing work there!

Sent from my iPhone using Tapatalk Pro

14JKURX · 11-13-2017, 08:02 AM

Fantastic work on the tables.

nothinbutwelves · 11-13-2017, 11:48 AM

Very cool

WildThings · 11-16-2017, 06:37 PM

WOW those are awesome. What epoxy are you using if you don't mind sharing?

Kevin Warren · 11-17-2017, 05:55 AM

Quote:

Originally Posted by wildthings

wow those are awesome. What epoxy are you using if you don't mind sharing?

Below is what I am using. If I remember correct I was told about it from here on TBH. I think someone was coating a bar top in their house.

Name: Capture.jpg
Views: 370
Size: 63.8 KB

Name: Capture.jpg
Views: 370
Size: 63.8 KB

Kevin Warren · 11-17-2017, 05:58 AM

Sanded down last night and applied the second coat.

Name: IMG_1598.jpg
Views: 358
Size: 62.2 KB

Chief Big Toe · 11-17-2017, 06:12 AM

oh my... Sir That is some amazing Craftsmanship !

be12hunt · 11-17-2017, 06:48 AM

That looks incredible. Awesome work

2good2Btru · 11-17-2017, 07:09 AM

Very nice. You definitely have skill

DUKFVR · 11-17-2017, 07:26 AM

Wow! That is Great work!

imsowright · 11-20-2017, 07:46 AM

Looks awesome.

fulmer34 · 11-20-2017, 08:08 AM

That's pretty slick.

TXBowhunter11 · 11-20-2017, 08:19 AM

Awesome!

WildThings · 11-20-2017, 10:37 PM

Quote:

Originally Posted by Kevin Warren

Below is what I am using. If I remember correct I was told about it from here on TBH. I think someone was coating a bar top in their house.

Attachment 883525

Thank you sir!

ReneC. · 11-21-2017, 09:31 PM

Nice work

sierracharlie338 · 11-21-2017, 09:50 PM

Awesome work! Can’t wait for the finished product

Sierracharlie out…

Kevin Warren · 11-22-2017, 06:58 AM

I applied what i hope is the last coat of epoxy yesterday. Hopefully today when I get home i will finish sand the legs and have it in the house for Thanksgiving Dinner.

Kevin Warren · 11-22-2017, 07:10 PM

My wife gave me special instructions earlier in the week. The tables had to be in the house and finished by thanksgiving day. Well its 7:15 the night before and I just finished placing the kitchen table in the kitchen. A few minor things to polish on but they turned out the way I wanted. I have the bases for the benches being made by my BIL now and will make some cedar benches to go with it later. For now the old chairs will be fine.

Name: IMG_1634.jpg
Views: 247
Size: 64.1 KB

Name: IMG_1634.jpg
Views: 247
Size: 64.1 KB

Name: IMG_1635.jpg
Views: 248
Size: 52.9 KB

BigLig · 11-22-2017, 07:24 PM

That's so cool!

mudmauler · 11-27-2017, 09:30 AM

Amazing

Sent from my iPhone using Tapatalk

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-12-2017, 07:33 AM	#51
kruppa24 Ten Point Join Date: Mar 2014 Location: gholson, tx Hunt In: Concho	good work, looks nice

06-19-2017, 10:07 AM	#52
shark Four Point Join Date: Nov 2006 Location: Granbury, Tx Hunt In: Wherever i can...	Looks very nice. Good work.

07-19-2017, 08:30 PM	#53
Kevin Warren Eight Point Join Date: Mar 2007 Location: Hockley Hunt In: Corrigan	I am out of cedar so I have not made anymore progress on the kitchen table. I could go get cedar from the locals but I am being a little picky on what cedar I use. The cedar that is on the Texas Flag table is from my uncle in Tennessee and it was mill cut by the Amish. I am headed back to Tennessee in August and will bring back a trailer load of cedar. So in the mean time I started one of our new end tables which is the Republic of Texas Flag. This table will also have the cedar wrapped around the edges but I am out of cedar. I will be making two more end tables, the Come And Take It Flag and the Dont Tread On Me Flag end tables. I also started the US Flag that I am donating to the K9 Officers Association.

07-19-2017, 08:36 PM	#54
Cheapsk8 Spike Join Date: May 2014 Location: SW Houston	Very nice

07-19-2017, 10:04 PM	#55
mobrien Four Point Join Date: Apr 2017 Location: San Antonio Hunt In: London, TX area	Awesome work there!

07-21-2017, 05:55 PM	#56
ThePumaLives Four Point Join Date: Jan 2017	Awesome work!

07-21-2017, 06:47 PM	#57
vanmedic Pope & Young Join Date: Jan 2011 Location: Van TX, East of Canton Hunt In: East Texas	Nice work

07-21-2017, 08:54 PM	#58
Kevin Warren Eight Point Join Date: Mar 2007 Location: Hockley Hunt In: Corrigan	Thanks Everyone.

07-21-2017, 09:41 PM	#59
DUKFVR Pope & Young Join Date: Apr 2011 Location: Sorry Azz Houston Hunt In: San Saba,TX	That is Great work!

07-22-2017, 07:28 AM	#60
live2hunt65 Pope & Young Join Date: May 2009 Location: SAN ANTONIO Hunt In: ANY WHERE I CAN	Nice

08-19-2017, 10:19 PM	#65
jbowman612 Six Point Join Date: Nov 2006 Location: Aubrey, TX Hunt In: Aubrey, TX & Public Land in TX/NE	That is awesome!

08-19-2017, 11:07 PM	#66
tradtiger Pope & Young Join Date: Sep 2013 Location: Austin Hunt In: Lee Co., Granger	Great work!

07-22-2017, 07:39 AM	#61
stickbowcoop Ten Point Join Date: Feb 2017 Location: Springtown TX Hunt In: OH, PA, looking for a place in TX.	Very cool, you do nice work!

07-22-2017, 07:40 AM	#62
akstigo01 Six Point Join Date: Nov 2014	May of been said but that could make a sweet poker table in a man cave.

07-22-2017, 07:50 AM	#63
Hotrodd Eight Point Join Date: Feb 2015 Location: Conroe Hunt In: Central Texas	Loves it!

08-19-2017, 10:17 PM	#64
Kevin Warren Eight Point Join Date: Mar 2007 Location: Hockley Hunt In: Corrigan	Finally made our trip to Tennessee to get the rest of the cedar that I needed to finish these tables. Epoxy clear on the top is the next step as soon as it arrives.

09-05-2017, 11:18 AM	#68
Kevin Warren Eight Point Join Date: Mar 2007 Location: Hockley Hunt In: Corrigan	Progress made this weekend. The high build epoxy stated that if I was not using a oil based stain then I may want to apply a coat of poly clear which is what i was going to do to the bottom and legs, and let dry for 48 hours. So here is the first coat of poly on both tables.

09-08-2017, 06:54 AM	#69
Oldtimer11 Nubbin' Buck Join Date: Apr 2016 Location: Flower Mound Hunt In: Sulphur, OK	God bless Texas! Looks great brother

09-08-2017, 10:09 AM	#70
David DeAnda Four Point Join Date: Sep 2016 Location: Lubbock	Those are both awesome!

09-08-2017, 05:29 PM	#71
Quackerbox Pope & Young Join Date: Jul 2010 Location: Magnolia Hunt In: The woods	Defineatly a difference in the cedar Sent from my SM-G930V using Tapatalk

09-11-2017, 07:21 AM	#72
DoubleGProstaff Ten Point Join Date: Nov 2009 Location: houston/kerrville Hunt In: Kerrville	That's a good looking table Sent from my iPhone using Tapatalk

09-11-2017, 09:39 AM	#73
Kevin Warren Eight Point Join Date: Mar 2007 Location: Hockley Hunt In: Corrigan	Got the seal coat added to the small table. I will apply the flood coat some time this week if the love bugs die down some.

09-11-2017, 01:05 PM	#74
1shot Ten Point Join Date: Nov 2012 Location: Waxahachie Hunt In: Hill	I love both of those.

09-11-2017, 01:15 PM	#75
TXHUNT3R Pope & Young Join Date: Mar 2013 Location: Hempstead, Tx Hunt In: Hempstead, TX	Holy crap, those are amazing!

09-11-2017, 05:16 PM	#76
DoubleGProstaff Ten Point Join Date: Nov 2009 Location: houston/kerrville Hunt In: Kerrville	Looks amazing Sent from my iPhone using Tapatalk

09-12-2017, 06:39 AM	#77
Kevin Warren Eight Point Join Date: Mar 2007 Location: Hockley Hunt In: Corrigan	Thanks for the comments guys. This has been a slow project but will be well worth it once I am done. The epoxy coat process has been slow due to the swarm of love bugs lately.

09-12-2017, 07:02 AM	#78
stickfigure Eight Point Join Date: Oct 2006 Location: Richmond Hunt In: D'Hanis	Beautiful work

11-13-2017, 06:03 AM	#79
Kevin Warren Eight Point Join Date: Mar 2007 Location: Hockley Hunt In: Corrigan	Progress finally made again. First coat of epoxy on the big table and final coat on my small table.

11-13-2017, 06:11 AM	#80
Iehooligan11b Ten Point Join Date: Oct 2014 Location: Texas	Wow. Amazing work, Sir. Looks fantastic.

11-13-2017, 06:39 AM	#81
Mike D Pope & Young Join Date: Oct 2006 Location: North Texas Hunt In: Haskell County, TX	Good Lord that’s amazing work there! Sent from my iPhone using Tapatalk Pro

11-13-2017, 08:02 AM	#82
14JKURX Ten Point Join Date: Jul 2016	Fantastic work on the tables.

11-13-2017, 11:48 AM	#83
nothinbutwelves Ten Point Join Date: Jun 2008 Location: TEXAS	Very cool