Announcement

Collapse
No announcement yet.

6mm questions

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    I would either do a Dasher or a BR Ackley.

    Comment


      #17
      Dasher

      Comment


        #18
        240 gibbs

        Comment


          #19
          I went 6 creed because of factory options. With 2 little kids i just don't have much time to load right now

          Comment


            #20
            Originally posted by sierracharlie338 View Post
            This here. My last one was an absolute hammer running 105 Amaxs at 2950.

            If you like to tinker with new things - 6GT

            Then,

            Dasher
            6x47
            XC in that order



            Sierracharlie out…
            6 gay tiger!

            Comment


              #21
              6mm questions

              Originally posted by trophy8 View Post
              6 gay tiger!


              Yeahhhhhhh boi!

              I’m prepping for a build I can’t lie [emoji23]


              Sierracharlie out…

              Comment


                #22
                I’m thinking of a 243 AI

                1/8” twist 25” barrel shooting 105-108

                Haven’t started yet, but that’s the plan anyway.
                Heavier hunting/ target rifle.

                Comment


                  #23
                  Only thing about the 6CM is barrel life. 1200-1500 rounds is what I'm hearing firsthand in PRS guns. I saw 3 or 4 this past weekend shooting 6BRA (BR Ackley).

                  I am in the same boat, I'm about to start a 6mm build. Leaning GT right now.

                  Comment


                    #24
                    What velocity are y’all expecting on some of these rounds?

                    Comment


                      #25
                      The Dasher is No Doubt one of the most accurate 6mm rounds prepping Lapua brass gets old. That's the reason I just chambered the 6Creed plus I already had the reamer at the house....Yes, there's Norma brass for the Dasher but I'd rather prep Lapua if I had the choice. I wish Lapua would go ahead and either make Dasher brass or 6X47 brass like they did with the Creedmoor.

                      Comment


                        #26
                        Originally posted by trophy8 View Post
                        What velocity are y’all expecting on some of these rounds?
                        Im running my Dasher at 2920 with the 109 Bergers. The thing about the Dasher is it will produce tiny groups today, tomorrow, and next week. My ES is single digit and very consistent.

                        Comment


                          #27
                          Originally posted by kck View Post
                          The Dasher is No Doubt one of the most accurate 6mm rounds prepping Lapua brass gets old. That's the reason I just chambered the 6Creed plus I already had the reamer at the house....Yes, there's Norma brass for the Dasher but I'd rather prep Lapua if I had the choice. I wish Lapua would go ahead and either make Dasher brass or 6X47 brass like they did with the Creedmoor.
                          You could run Alpha Dasher brass. Its pretty good stuff.

                          Comment


                            #28
                            I would look at the gap prs production rifle in 6 gt. Looks interesting to me.

                            Comment


                              #29
                              Originally posted by JakeGraves View Post
                              You could run Alpha Dasher brass. Its pretty good stuff.
                              Good to know, thanks Jake.

                              Comment


                                #30
                                You want to keep it simple, Then go 243Win-AI, or 6mmRem-AI

                                Comment

                                Working...
                                X