Osage build

[4dog]

So im working this new bow,it was a 2" longer and i piked it ,trying to get it down to 50/55#@27.5"...any other bowyers or builders see any problems with this tiller that i might be missing....another set of eyes would ve helpful im only 3" off my draw length...thanks in advance.

[flywise]

I wish i had a clue because that would mean that i knew how to make one

[TejasNW]

The last 1/3 of each limb is fairly straight. They could work a bit more. Get them working a bit and that will give you faster tip speed and give you that last 3 inches of draw without dropping a lot of weight.

[DRT]

I don't know squat but it looks like the bends don't match.

Gary

[SwampRabbit]

The last 1/3 of each limb is fairly straight. They could work a bit more. Get them working a bit and that will give you faster tip speed and give you that last 3 inches of draw without dropping a lot of weight.

That is what I noticed too. I don't see any hinges, and it looks symmetrical... but there seems to be alot of meat at the last third of both limbs.

That is a good looking stick Erik.



Sent from my SM-G930P using Tapatalk

[Geezy Rider]

If he's building a Holmegaard bow then the last third would look thicker from that angle.

With out a grid pattern background it's difficult to judge the evenness of the tillering.

[4dog]

Not a holmie...its more of a pyramid profile..i agree with the last 3rd of each limb ...probably be done by monday....thanks for looking !

[Selfbowman]

Looks good to me. It's not drawn all the way is it? I leave a lot of my bows stiff
At the last 7 in. Just don't make the tips 3/4 in. wide. You will
Get good cast. Arvin

[4dog]

Full draw pic...pleased with the bow..not my fastest but definately not the slowest...wife is not a photographer...lol

[DRT]

I like that draw board.

[4dog]

Lol...makes ya look...hard!

[SwampRabbit]

Good job Erik

Sent from my SM-G930P using Tapatalk

[4dog]

Thanks my friend !!!

[Selfbowman]

Well done

[4dog]

Thank you sir !