This one has me and my pro shop stumped.
Set up is Hoyt Defiant - 26.5" draw @ 46 lbs.
Arrows are Gold Tip XT Hunter 400 spine (I've tried 500 also) cut to 26.5"
100 grain field point with 50 grain weighted insert. Total arrow weight is 375 grains. Rest is QAD drop a way.
Broadheads are 100 grain slick tricks.
At 30 yards, my broadheads are consistently impacting 6" low relative to field points. At 20 yards, still low but only by a couple inches.
I have tried moving the rest up. No change. I have gone from 500 to 400 spine arrows...no change. I have tried different broadheads..even worse.
Now I'm seeing what appears to be color transfer from my vanes in the "U" of the rest.
I'm at the point of wanting to start completely over with a different arrow rest. I've had QADs before on other bows and have never had this problem. The pro shop recently checked cam timing. Arrows made good tears through paper. I haven't re-checked paper tuning since I messed with the rest.
Outta ideas...what say you green screen?
Set up is Hoyt Defiant - 26.5" draw @ 46 lbs.
Arrows are Gold Tip XT Hunter 400 spine (I've tried 500 also) cut to 26.5"
100 grain field point with 50 grain weighted insert. Total arrow weight is 375 grains. Rest is QAD drop a way.
Broadheads are 100 grain slick tricks.
At 30 yards, my broadheads are consistently impacting 6" low relative to field points. At 20 yards, still low but only by a couple inches.
I have tried moving the rest up. No change. I have gone from 500 to 400 spine arrows...no change. I have tried different broadheads..even worse.
Now I'm seeing what appears to be color transfer from my vanes in the "U" of the rest.
I'm at the point of wanting to start completely over with a different arrow rest. I've had QADs before on other bows and have never had this problem. The pro shop recently checked cam timing. Arrows made good tears through paper. I haven't re-checked paper tuning since I messed with the rest.
Outta ideas...what say you green screen?
Comment