Reply
Go Back   TexasBowhunter.com Community Discussion Forums > Topics > Around the Campfire
 
Thread Tools Display Modes
Old 05-07-2018, 08:55 AM   #1
JimD
Spike
 
Join Date: Dec 2012
Default Best coon guards for your deer feeder?

I find that I have problems with the coons climbing up and working on emptying out my deer feeders. Time or two they pulled down the whole unit letting all the corn out even with a cage attached. I use the cheaper Academy tripod feeders. I have rigged one up but it is simply small cage that is rigged to attach to the top of the unit with a piece of rebar slid thru the top of the unit support the wire from being pulled down by the coons swinging on it. too bulky and a little hard to get off to service the timer unit but it does work. Then new cheap feeders are a different matter with no good way to attach the cage.

HAS anyone figured out how to build your own Racoon guard that will attach to your feeder to stop or slow them down?

Any pictures and rigging advice welcomed on what has worked best for you.
JimD is offline   Reply With Quote Back To The Top
Old 05-07-2018, 09:04 AM   #2
Smart
Pope & Young
 
Smart's Avatar
 
Join Date: Oct 2006
Location: Denton, TX
Hunt In: Tom Green County
Default

I'm assuming 55 gallon drums? I added a 55 gallon lid to my square hopper feeder so I could use one I made to fit a 55 gallon drum bottom out of 1x1" welded wire. Like $15 for enough wire to make 2 guards. Available at Lowes or TSC..

Name:  Varmint Guard 55gal - TBH.jpg
Views: 1160
Size:  49.8 KB

Name:  Varmint guard2 (Medium).JPG
Views: 1154
Size:  27.4 KB

Name:  IMG_5249 (Medium).jpg
Views: 1156
Size:  65.6 KB

Name:  IMG_6807 (Medium).jpg
Views: 1156
Size:  68.7 KB

Name:  IMG_7544 (Medium).jpg
Views: 1150
Size:  69.3 KB

Name:  IMG_8930 (Medium).jpg
Views: 1153
Size:  38.5 KB

Name:  IMG_0073 (Medium).jpg
Views: 1149
Size:  35.4 KB

Name:  IMG_7042.jpg
Views: 1145
Size:  69.8 KB

Last edited by Smart; 05-07-2018 at 09:06 AM.
Smart is offline   Reply With Quote Back To The Top
Old 05-07-2018, 09:11 AM   #3
Traildust
Pope & Young
 
Traildust's Avatar
 
Join Date: Apr 2007
Location: Alvin, Texas
Hunt In: The Red Dirt Area In Doss, Texas!
Default

Cac
Traildust is online now   Reply With Quote Back To The Top
Old 05-07-2018, 09:12 AM   #4
Hoss163
Ten Point
 
Hoss163's Avatar
 
Join Date: Jul 2016
Location: Abilene tx
Hunt In: Oklahoma
Default

Slinky time
Hoss163 is online now   Reply With Quote Back To The Top
Old 05-07-2018, 09:13 AM   #5
Jkbow
Four Point
 
Jkbow's Avatar
 
Join Date: Oct 2014
Location: Mont Belvieu,Texas
Hunt In: Telegraph, TX.
Default

Put Slinky's on the legs of the feeder It will confuse them.
Jkbow is offline   Reply With Quote Back To The Top
Old 05-07-2018, 09:23 AM   #6
Gunnyart
Pope & Young
 
Gunnyart's Avatar
 
Join Date: Sep 2013
Location: Mansfield, TX
Hunt In: Gouldbusk, TX
Default

I know where you can get some cheap.
http://www.gunnyart.com/product/large-slinky/
Gunnyart is online now   Reply With Quote Back To The Top
Old 05-07-2018, 09:56 AM   #7
Briar Friar
Ten Point
 
Briar Friar's Avatar
 
Join Date: May 2015
Location: Texas
Hunt In: San Gabriel, Colorado and Rio Grande watersheds
Default

I did something similar to Smarts cage but mine are bigger. 24” tall 2x2 welded wire around a 55gal drum...attached using self tapping screws and bottle caps as washers/grabbers for the wire. I used hog/bull rings to fasten the bottom flat wire to the ring/cage. I cut a 15”x15” hole in the cage wire...leaving wire at the top and bottom for structural integrity. I then took a 24”x24” piece of the same wire...using the tag ends from the cut...dual purposed those for attachment and to fashion as a hinge. The 24x24 cut wire acts as a door on the outside of the cage. I cut some small gauge chain and fastened it to the wire door. On the other end of the chain, I attached some small springs and carabiners to the end of the springs. The springs keep the tension of the gate/door closed. The carabiners work nicely on the 2x2 wire for onehanded operation. Two chain latches...top and bottom.

I could just wire or ziptie the gate closed but wiring and unwiring wears the wire out quickly. I couldve used the carabiners as latches but I didnt like the slack it left in the door. “Give a coon an inch...”

Ill post some pics later.

Last edited by Briar Friar; 05-07-2018 at 09:59 AM.
Briar Friar is offline   Reply With Quote Back To The Top
Old 05-07-2018, 09:57 AM   #8
Bigdaddy
Ten Point
 
Join Date: Nov 2010
Location: TEXAS
Default

22
Bigdaddy is offline   Reply With Quote Back To The Top
Old 05-07-2018, 10:31 AM   #9
JimD
Spike
 
Join Date: Dec 2012
Default

I am not very sporting as one of the feeders is 45 yards from my back door. I did find that the Mossberg Mavericks do not handle the 12 guage 3" 00 and 000 buck shot well as they rock these little guns but the old Mossberg 3.5 duck and goose gun will shoot them well and not have a problem with the pressure.

The rebar is holding this feeder but what I have is the cheap Academy plastic 89$ on end of summer sale- 4 bag of corn feeders that do not have a lot of metal to work with as everything is plastic though I think that I can rig a good cage with some more ideas.

The one in my field away from the house is the new cheap version with everything plastic. May have to try to treat it like a plaster wall and hang it that way. Suggestions appreciated as I was out of corn in both when I stopped by to ck cows on Saturday am.
I do like what you did for the 55 gal drums.
JimD is offline   Reply With Quote Back To The Top
Old 05-07-2018, 10:41 AM   #10
Fishndude
Pope & Young
 
Fishndude's Avatar
 
Join Date: Oct 2006
Location: Arlington, Texas
Hunt In: Mason, Ellis and Dimmit counties
Default

Quote:
Originally Posted by JimD View Post
I am not very sporting as one of the feeders is 45 yards from my back door. I did find that the Mossberg Mavericks do not handle the 12 guage 3" 00 and 000 buck shot well as they rock these little guns but the old Mossberg 3.5 duck and goose gun will shoot them well and not have a problem with the pressure.

The rebar is holding this feeder but what I have is the cheap Academy plastic 89$ on end of summer sale- 4 bag of corn feeders that do not have a lot of metal to work with as everything is plastic though I think that I can rig a good cage with some more ideas.

The one in my field away from the house is the new cheap version with everything plastic. May have to try to treat it like a plaster wall and hang it that way. Suggestions appreciated as I was out of corn in both when I stopped by to ck cows on Saturday am.
I do like what you did for the 55 gal drums.


Doesnít matter if itís plastic.

Fishndude is offline   Reply With Quote Back To The Top
Old 05-07-2018, 10:49 AM   #11
day0082
Ten Point
 
day0082's Avatar
 
Join Date: Mar 2008
Location: Humble
Hunt In: Dewitt county
Default

No such thing..
day0082 is offline   Reply With Quote Back To The Top
Old 05-07-2018, 11:08 AM   #12
texan4ut
Ten Point
 
texan4ut's Avatar
 
Join Date: Jul 2014
Location: Round Rock, TX
Hunt In: Where I can, Terrell County
Default

I solved the problem with 5 inch diameter cheap PVC pipe. slip a piece over the leg aboyt 18 inches from the ground and zip tie it at the top so it is loose and wobbles. When the coons try and climb up it wobbles and they cant hold on.
Attached Images
  
texan4ut is offline   Reply With Quote Back To The Top
Old 05-07-2018, 11:41 AM   #13
droebuck
Eight Point
 
droebuck's Avatar
 
Join Date: Aug 2012
Location: Tomball
Hunt In: London, New Braunfels, Montgomery
Default

Build one out of 1x1 wire as others have or you can get them at Premier Feeders in Brookshire for pretty cheap. Whatever you do make it the same size as the barrel so they can't reach the spinner.
droebuck is offline   Reply With Quote Back To The Top
Old 05-07-2018, 11:51 AM   #14
AntlerCollector
Pope & Young
 
AntlerCollector's Avatar
 
Join Date: Apr 2014
Hunt In: Votaw, Hardin/Polk Co., TX. Bon Weir, Newton Co., El Dorado, Schleicher Co., TX.
Default

Quote:
Originally Posted by Hoss163 View Post
Slinky time
Quote:
Originally Posted by Jkbow View Post
Put Slinky's on the legs of the feeder It will confuse them.



This^^^^^^^. Slinky's on the feeder legs. I've been doing it like that for a while now. They don't steal my corn anymore. I had to replace one Slinky about 3 months ago because it got too stretched out that it no longer would be effective. For a couple $ each it's by far the cheapest deterrent there is.
AntlerCollector is online now   Reply With Quote Back To The Top
Old 05-07-2018, 12:18 PM   #15
Bisch
Pope & Young
 
Bisch's Avatar
 
Join Date: Oct 2007
Location: Sonora, Tx
Default

I used 1x2 welded wire, and the coons canít get to the spinner plate anymore! Built just like the ones in the pics above. The coons still eat off the ground, and every once in a while climb around in the cage trying, but they just canít reach the gold!!!

Iíve tried the pvc pipes and tack strips and grease in the feeder legs. Coons just laugh at all those!

Bisch


Sent from my iPhone using Tapatalk Pro
Bisch is online now   Reply With Quote Back To The Top
Old 05-07-2018, 05:43 PM   #16
JimD
Spike
 
Join Date: Dec 2012
Default

Still hope to get more information but like the idea of attaching to the sides of the plastic. Just need to get some 1 inch wire.

Now if we can get a few more pxs of rigging wire there might even be a better way.

Thanks, Jim

I do shoot the hogs with the buckshot plus any big boar I tend to shoot a little "far" back to keep from having to drag the stinking thing off.

Trouble I have at night with the 22 is neighbors in the area and one shot one coon the way they will run at first fright or shot.
JimD is offline   Reply With Quote Back To The Top
Old 05-07-2018, 06:51 PM   #17
RJH1
Eight Point
 
Join Date: Mar 2015
Location: Abilene
Hunt In: Abilene area
Default

Spin tech and no issues. No cages and the coons still don't get the corn
RJH1 is offline   Reply With Quote Back To The Top
Old 05-07-2018, 07:50 PM   #18
Chasing_bone
Ten Point
 
Chasing_bone's Avatar
 
Join Date: Jul 2011
Location: Dallas, TX
Hunt In: Navarro County
Default

I’m about to put a hot wire around my feed peen to keep them from even climbing in. I’m not sure if you have a pen or not. There is another thread on here that a guy put a zapper on his cage.
Chasing_bone is offline   Reply With Quote Back To The Top
Old 05-07-2018, 07:54 PM   #19
Luck_of_the_Draw
Pope & Young
 
Luck_of_the_Draw's Avatar
 
Join Date: Oct 2006
Location: North DFW
Hunt In: Thinking of taking up fishing.
Default

Hot wire around the feeder motor and grounded to the legs
Luck_of_the_Draw is offline   Reply With Quote Back To The Top
Old 05-07-2018, 08:02 PM   #20
jimmyneutrontx
Ten Point
 
jimmyneutrontx's Avatar
 
Join Date: Apr 2012
Location: Magnolia, Tx
Hunt In: Brady, Tx
Default

What about for protein feeders?
jimmyneutrontx is offline   Reply With Quote Back To The Top
Old 05-07-2018, 08:15 PM   #21
Big pig
Ten Point
 
Join Date: Dec 2013
Location: Cypress, tx
Hunt In: Goliad and Leon Co.
Default

4” pvc (schedule 40) pieces- 30” or 40” long suspended by light chain
Nothing else necessary.
Running about 12 that way for at least 10 years.
No coon photos on the mechanisms.
DP’s. Pm for any questions.
Big pig is offline   Reply With Quote Back To The Top
Old 05-07-2018, 08:19 PM   #22
Briar Friar
Ten Point
 
Briar Friar's Avatar
 
Join Date: May 2015
Location: Texas
Hunt In: San Gabriel, Colorado and Rio Grande watersheds
Default

Ive never been able to load more than one photo at a time from my phone...so bear with my excessive posts. Had to square the pic for it to load too.
Attached Images
 
Briar Friar is offline   Reply With Quote Back To The Top
Old 05-07-2018, 08:20 PM   #23
Briar Friar
Ten Point
 
Briar Friar's Avatar
 
Join Date: May 2015
Location: Texas
Hunt In: San Gabriel, Colorado and Rio Grande watersheds
Default

Curled the wire gate tag ends for some hinging action
Attached Images
 
Briar Friar is offline   Reply With Quote Back To The Top
Old 05-07-2018, 08:22 PM   #24
Briar Friar
Ten Point
 
Briar Friar's Avatar
 
Join Date: May 2015
Location: Texas
Hunt In: San Gabriel, Colorado and Rio Grande watersheds
Default

Electrical fixture chain with tension springs and carabiners.
Attached Images
 
Briar Friar is offline   Reply With Quote Back To The Top
Old 05-07-2018, 08:24 PM   #25
Briar Friar
Ten Point
 
Briar Friar's Avatar
 
Join Date: May 2015
Location: Texas
Hunt In: San Gabriel, Colorado and Rio Grande watersheds
Default

Open gate
Attached Images
 
Briar Friar is offline   Reply With Quote Back To The Top
Old 05-07-2018, 08:28 PM   #26
Briar Friar
Ten Point
 
Briar Friar's Avatar
 
Join Date: May 2015
Location: Texas
Hunt In: San Gabriel, Colorado and Rio Grande watersheds
Default

Ive anothe Wild Game/Moutltrier plastic feeder that I did the same type cage but the 2” square tubing legs attach near the spinner...and impeded proper marrying of cage to the hopper body...so I simply cut two squares of wire and self tapped...with bottle cap washer...the cage wire to the legs. The legs fit perfectly in one wire square width but two high...and allowed the cage to flush mount to the plastic hopper body.
Same same but different.

If I had had key ring snaps like FnDs ...Idve used those...for the hinges and gate latches...but didnt.

Last edited by Briar Friar; 05-07-2018 at 08:37 PM. Reason: FnDtypeSpake
Briar Friar is offline   Reply With Quote Back To The Top
Old 05-07-2018, 08:37 PM   #27
trx250r
Six Point
 
Join Date: Apr 2015
Default

This is close to the others. Just out of expanded metal. 3 or 4 beam clamps. With wingnuts welded to them, tool less.

Sent from my SM-N950U using Tapatalk
trx250r is offline   Reply With Quote Back To The Top
Old 05-07-2018, 09:20 PM   #28
Big pig
Ten Point
 
Join Date: Dec 2013
Location: Cypress, tx
Hunt In: Goliad and Leon Co.
Default

I have taken the high quality Ultramatic cages off now cause the corn piles up underneath worse. PVC eliminates the need for them.
Big pig is offline   Reply With Quote Back To The Top
Old 05-07-2018, 09:36 PM   #29
RMW
Ten Point
 
RMW's Avatar
 
Join Date: Nov 2015
Location: Burr
Hunt In: Down South
Default

I built some winch up style feeders pretty much like the hangíem high but higher. I used 17ft legs with a little wider stance so when the coons jump on to the barrel they canít jump back on to the legs to get down. They do not like falling from that high up. Never have any coons bother my corn feeders.
RMW is offline   Reply With Quote Back To The Top
Old 05-07-2018, 09:52 PM   #30
GIL HUNTS
Eight Point
 
GIL HUNTS's Avatar
 
Join Date: Dec 2012
Hunt In: Looking for a lease. Hunted Gillespie county for over 40 years. The search begins...
Default

The cages and PVC pipes over the feeders as pictured above.
GIL HUNTS is offline   Reply With Quote Back To The Top
Old 05-08-2018, 12:38 PM   #31
JimD
Spike
 
Join Date: Dec 2012
Default

I have that same old feeder with the metal wild game box and metal supports.
The new one has the plastic on plastic and not metal supports to work with but a larger cage attached as above could solve the problems.

BF - Do you have a px of your set up if you have the Academy el cheapo all plastic and 4 bagger feeder?

Thanks, Jim

I posted up a different type of pen hog trap and would appreciate you taking a look and offering any suggestions . The trap is a spin on the Wexford trap where you have a 36" opening into the trap and the trap is open with a trip stick to close the trap WHILE the Wexford trap has a 24" width opening going down to a 14 inch opening and the hogs have to push in or go thru the the narrow opening. Several articles out that big hogs will not push into a tight trap very often.

It has worked well for me but wonder with all the minds here how it can be made better?
JimD is offline   Reply With Quote Back To The Top
Old 05-09-2018, 08:49 PM   #32
Briar Friar
Ten Point
 
Briar Friar's Avatar
 
Join Date: May 2015
Location: Texas
Hunt In: San Gabriel, Colorado and Rio Grande watersheds
Default

I do.

Same same but different. I (forgot I) had to run the leg post bases through the cage for a proper marrying. The gate is situated between leg posts...on left. Self tapped the cage to the hopper body and leg post bases. I can still unattach legs from bases and move feeder with cage attached or simply unattach by unscrewing three self tapping screws...if necessary. I like the spinner plate etc being protected by the cage.

PM if any other questions.

Good luck. God bless!
Attached Images
 

Last edited by Briar Friar; 05-09-2018 at 08:52 PM.
Briar Friar is offline   Reply With Quote Back To The Top
Old 05-29-2018, 02:08 PM   #33
JimD
Spike
 
Join Date: Dec 2012
Default

I found the 1"x1" wire at Ace hardware 24"x15'
Part number 412415 if you need to get the 1 inch wire. It is a pain to find or find in stock.
Luck.

Jim
JimD is offline   Reply With Quote Back To The Top
Old 05-29-2018, 03:49 PM   #34
bakin7005
Ten Point
 
bakin7005's Avatar
 
Join Date: Dec 2015
Location: North Richland Hills
Hunt In: Oklahoma / San Saba Co.
Default

Most effective coon "guard" I've found. Dukes are the best!
Name:  DUKES.jpg
Views: 601
Size:  79.2 KB
bakin7005 is offline   Reply With Quote Back To The Top
Old 05-30-2018, 11:00 AM   #35
Done'it
Four Point
 
Done'it's Avatar
 
Join Date: May 2007
Location: San Antonio
Hunt In: Where pigs are
Default

I'm just lazy - I run about a 1 foot line of grease out of my grease gun on each leg about half way up, yes you have to remember not to grab the leg with your hand but since I hunt in rattle snake country have to pay attention to what I'm doing anyhow
Done'it is offline   Reply With Quote Back To The Top
Old 05-30-2018, 02:30 PM   #36
coy-ote
Ten Point
 
Join Date: Feb 2009
Location: la vernia tx
Hunt In: Dimmit county
Default

www.coonhood.com work great save a lot of feed no fooling with it once installed
coy-ote is online now   Reply With Quote Back To The Top
Old 05-30-2018, 07:01 PM   #37
sharkhunter
Pope & Young
 
sharkhunter's Avatar
 
Join Date: Dec 2006
Location: Tarkington , TX
Hunt In: In the woods
Default

I designed a feeder that throws the corn out of a slot. Zero issues of any kind and coons canít touch it!
Attached Images
 
sharkhunter is offline   Reply With Quote Back To The Top
Old 05-30-2018, 07:07 PM   #38
sharkhunter
Pope & Young
 
sharkhunter's Avatar
 
Join Date: Dec 2006
Location: Tarkington , TX
Hunt In: In the woods
Default

a big basket is the way to go !
Attached Images
 

Last edited by sharkhunter; 05-30-2018 at 07:10 PM.
sharkhunter is offline   Reply With Quote Back To The Top
Old 07-19-2018, 12:41 PM   #39
RyanC26
Six Point
 
RyanC26's Avatar
 
Join Date: May 2013
Location: Pearland, Brazoria Co.
Hunt In: South East Texas
Default

Quote:
Originally Posted by bakin7005 View Post
Most effective coon "guard" I've found. Dukes are the best!
Attachment 909704
That is what I am talking about we used these out in west Texas. It did not matter how many times we set them, if it set over night there would be a coon stuck to it.
RyanC26 is offline   Reply With Quote Back To The Top
Old 07-19-2018, 12:53 PM   #40
mpotts
Ten Point
 
mpotts's Avatar
 
Join Date: Jun 2010
Location: texas
Hunt In: Lometa Tx
Default

Love the Dukes cuffs
mpotts is online now   Reply With Quote Back To The Top
Old 07-20-2018, 03:01 PM   #41
SPUD
Pope & Young
 
SPUD's Avatar
 
Join Date: Feb 2007
Location: Hallsville, TX
Hunt In: Nacogdoches & Shelby Co; Unit 12 KS
Default

im gonna try that slinky thing..i want to see them try climbing that
SPUD is online now   Reply With Quote Back To The Top
Old 07-21-2018, 10:07 PM   #42
Mongo45
Eight Point
 
Mongo45's Avatar
 
Join Date: Feb 2014
Location: La Porte
Hunt In: Lavaca Co., Angelina Co.
Default

Eliminator spin plate, $40 problem solver
Mongo45 is offline   Reply With Quote Back To The Top
Old 07-21-2018, 10:55 PM   #43
DBLHKUP
Ten Point
 
DBLHKUP's Avatar
 
Join Date: Oct 2006
Location: Katy, Texas
Hunt In: Burleson Co, Webb Co
Default

Quote:
Originally Posted by Mongo45 View Post
Eliminator spin plate, $40 problem solver
^^^^^^^This solved it for us, no dealing with baskets anymore. Works great
DBLHKUP is offline   Reply With Quote Back To The Top
Old 07-22-2018, 11:33 AM   #44
gonehuntin68
Pope & Young
 
gonehuntin68's Avatar
 
Join Date: Mar 2008
Location: Victoria, TX
Hunt In: Victoria county
Default

Quote:
Originally Posted by Mongo45 View Post
Eliminator spin plate, $40 problem solver
They are more of problem then a problem solver for me. I have around 15 of them. They are always sticking in the down position due to being gummed up with corn dust or corn kernels sticking in the links. Even when they are working right, the coons at my places have learned how to pull them down to get to the corn. I had to put cages on all of mine the coons could reach. You don't need a big cage if the Eliminator is working properly because they need to get a paw on both sides of the plate and hang on it to pull it down. Any size cage will stop them from doing that although I recently saw two coons tag team the spinner plate with a small cage and pull it down but that will be very rare.
gonehuntin68 is offline   Reply With Quote Back To The Top
Old 07-22-2018, 12:13 PM   #45
Casey
Administrator
 
Casey's Avatar
 
Join Date: Oct 2006
Location: Bulverde
Default

Slinky's worked for me. I have the square cage with 3/4-1" gaps in the cage, but they still liked to hang off of that working on the eliminator plate. Since putting slinky's on, I haven't got a single pic out of several thousand with a coon on the feeder like I was pre-slinky. Also, you can tell in all pics that the spinner plate does not move between pics meaning coons are getting to it and avoiding getting their picture taken. Slinky's work.
Casey is offline   Reply With Quote Back To The Top
Old 07-22-2018, 12:19 PM   #46
equyst
Six Point
 
Join Date: Apr 2018
Default

interesting thread
equyst is offline   Reply With Quote Back To The Top
Old 07-22-2018, 01:10 PM   #47
Big pig
Ten Point
 
Join Date: Dec 2013
Location: Cypress, tx
Hunt In: Goliad and Leon Co.
Default

Quote:
Originally Posted by texan4ut View Post
I solved the problem with 5 inch diameter cheap PVC pipe. slip a piece over the leg aboyt 18 inches from the ground and zip tie it at the top so it is loose and wobbles. When the coons try and climb up it wobbles and they cant hold on.
Simple and cheap. Light chain works forever instead of straps.
One joint cut into 40Ē pieces. Slick and shiny Schedule 40 only
Big pig is offline   Reply With Quote Back To The Top
Old 07-22-2018, 01:17 PM   #48
Quackerbox
Pope & Young
 
Quackerbox's Avatar
 
Join Date: Jul 2010
Location: Magnolia
Hunt In: The woods
Default

Quote:
Originally Posted by sharkhunter View Post
I designed a feeder that throws the corn out of a slot. Zero issues of any kind and coons canít touch it!
Where is the timer, motor etc?

Inside the barrel?
Quackerbox is offline   Reply With Quote Back To The Top
Old 07-22-2018, 01:29 PM   #49
sharkhunter
Pope & Young
 
sharkhunter's Avatar
 
Join Date: Dec 2006
Location: Tarkington , TX
Hunt In: In the woods
Default

Quote:
Originally Posted by Quackerbox View Post
Where is the timer, motor etc?

Inside the barrel?
Pm sent
sharkhunter is offline   Reply With Quote Back To The Top
Old 07-22-2018, 04:49 PM   #50
Paycheck
Four Point
 
Paycheck's Avatar
 
Join Date: May 2015
Location: Waco
Default

I do the PVC
Paycheck is offline   Reply With Quote Back To The Top
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:23 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2018, vBulletin Solutions Inc.
Copyright 1999-2012, TexasBowhunter.com