Reply
Go Back   TexasBowhunter.com Community Discussion Forums > Topics > D-I-Y Projects
 
Thread Tools Display Modes
Old 11-28-2016, 09:32 AM   #1
HainesNYT
Ten Point
 
HainesNYT's Avatar
 
Join Date: Jun 2012
Location: Hondo
Hunt In: Home, MN, WY, South Africa
Default Observation Deck

A build-along project. Neighbor had this old, wooden observation deck that had been repaired many many times with whatever was handy. This thing must have been about 15' tall....and ready to fall at any moment. He also wanted another shed. I suggested a conex box/shipping container. We went with a 20 footer because I could haul it and set it in place. Got it moved and leveled with the skid loader. Convinced him to let me tear down the old observation deck and build a new one out of steel, connected to the conex.

I'm running 6" purlin X 30' along the top, length wise. There will be 10' over hang to give him a bit of a carport for the quads. The purlin will sit on top of 2x4 rectangle tubing so it will clear the ribs of the original roof ...it is a bit wavy.
HainesNYT is offline   Reply With Quote Back To The Top
Old 11-28-2016, 09:34 AM   #2
HainesNYT
Ten Point
 
HainesNYT's Avatar
 
Join Date: Jun 2012
Location: Hondo
Hunt In: Home, MN, WY, South Africa
Default





HainesNYT is offline   Reply With Quote Back To The Top
Old 11-28-2016, 10:31 PM   #3
Buck Shot
Six Point
 
Buck Shot's Avatar
 
Join Date: Aug 2016
Location: Kerens
Hunt In: Freestone County
Default

In for the build
Buck Shot is offline   Reply With Quote Back To The Top
Old 12-02-2016, 08:18 AM   #4
HainesNYT
Ten Point
 
HainesNYT's Avatar
 
Join Date: Jun 2012
Location: Hondo
Hunt In: Home, MN, WY, South Africa
Default

Slow build...not many photo ops over the last few days.


The east side is welded solid. You can just make out a feeder in the upper right corner...about 75 yards.


Here is the view to the south. This feeder is about 170 yards.


This photo is to the west, before welding.


All clamped-up ready for welding.
HainesNYT is offline   Reply With Quote Back To The Top
Old 12-02-2016, 08:31 AM   #5
HainesNYT
Ten Point
 
HainesNYT's Avatar
 
Join Date: Jun 2012
Location: Hondo
Hunt In: Home, MN, WY, South Africa
Default


This is the frame of a 8x10 deck I had built from my grandmother 16 years ago. Stripped off the old boards and cut off the square tubing legs. Used the crane attachment I made for the loader to hang it. I had welded tabs on the side of the conex for this to sit on, and we clamped the legs to the other side. It's now welded to the conex. The legs I'll trim to the appropriate length and weld in place. I'm planning on using my big hammer drill to anchor a T-post or sucker-rod in the rock and weld them to the legs to keep them from sliding/moving around. This deck will be the "landing" for the stairs, and provide a bit of shade for the quads or whatever.
HainesNYT is offline   Reply With Quote Back To The Top
Old 05-19-2017, 08:18 PM   #6
HainesNYT
Ten Point
 
HainesNYT's Avatar
 
Join Date: Jun 2012
Location: Hondo
Hunt In: Home, MN, WY, South Africa
Default

Crazy slow progress...mostly because I cannot stay focused on one project!! Just completed the stairs. Purchased the first 5 steps from a salvage yard. The other steps also came from salvage but the C-channel was purchased new. I left a little room for error, my stair calculations suck... it is loaded on the trailer and waiting for transport and fitting. Will update when that happens.



HainesNYT is offline   Reply With Quote Back To The Top
Old 05-21-2017, 08:57 PM   #7
txtradesman
Ten Point
 
txtradesman's Avatar
 
Join Date: Aug 2009
Location: Austin
Hunt In: Texas
Default

Nice build! I have a box Id like to do something similar too
txtradesman is offline   Reply With Quote Back To The Top
Old 05-21-2017, 09:23 PM   #8
ReydonPete
Ten Point
 
ReydonPete's Avatar
 
Join Date: Mar 2016
Hunt In: Ok,Tx
Default

Nice looking build
ReydonPete is offline   Reply With Quote Back To The Top
Old 06-06-2017, 04:52 PM   #9
Txhuntr2
Four Point
 
Join Date: Apr 2017
Location: Houston
Hunt In: Val Verde
Default

Tagged to watch
Txhuntr2 is offline   Reply With Quote Back To The Top
Old 06-06-2017, 05:25 PM   #10
wade _s
Eight Point
 
wade _s's Avatar
 
Join Date: Aug 2012
Location: Harker Heights, Texas
Hunt In: Lometa, TX
Default

Neat project!
wade _s is offline   Reply With Quote Back To The Top
Old 06-06-2017, 06:05 PM   #11
HainesNYT
Ten Point
 
HainesNYT's Avatar
 
Join Date: Jun 2012
Location: Hondo
Hunt In: Home, MN, WY, South Africa
Default

Thanks guys, slooow progress. I'm out of town but hope to get something done on it in 2-3 weeks. Will post updates.
HainesNYT is offline   Reply With Quote Back To The Top
Old 06-07-2017, 03:04 PM   #12
Schubert6689
Six Point
 
Schubert6689's Avatar
 
Join Date: Jul 2012
Location: San Antonio
Hunt In: Kinney County
Default

Looking good.
Schubert6689 is offline   Reply With Quote Back To The Top
Old 06-07-2017, 03:09 PM   #13
MySRT8U
Pope & Young
 
MySRT8U's Avatar
 
Join Date: Feb 2013
Location: Schertz
Hunt In: Boerne and anywhere else I can find
Default

looks great
MySRT8U is offline   Reply With Quote Back To The Top
Old 09-08-2017, 10:56 PM   #14
HainesNYT
Ten Point
 
HainesNYT's Avatar
 
Join Date: Jun 2012
Location: Hondo
Hunt In: Home, MN, WY, South Africa
Default

Finally had a chance to make some more progress...got the stairs welded in place. Also added 2 more purlin where the first part of the deck is. Have about 70 % of the vertical pieces of the hand-rail in place. The big 4x4 tubes will be for the pergola.




HainesNYT is offline   Reply With Quote Back To The Top
Old 09-09-2017, 12:36 AM   #15
hog_down
Four Point
 
Join Date: Mar 2017
Default

Great looking welds, sir
hog_down is offline   Reply With Quote Back To The Top
Old 09-09-2017, 06:25 PM   #16
HainesNYT
Ten Point
 
HainesNYT's Avatar
 
Join Date: Jun 2012
Location: Hondo
Hunt In: Home, MN, WY, South Africa
Default

Quote:
Originally Posted by hog_down View Post
Great looking welds, sir


Thanks...I try, but they ain't always pretty. The stairs were done in the shop, with my big wirefeed & gas...the stuff in the field is being done with my Millermatic 211 & fluxcore.
HainesNYT is offline   Reply With Quote Back To The Top
Old 09-09-2017, 06:47 PM   #17
jbowman612
Six Point
 
jbowman612's Avatar
 
Join Date: Nov 2006
Location: Aubrey, TX
Hunt In: Aubrey, TX & Public Land in TX/NE
Default

Cool build, following
jbowman612 is offline   Reply With Quote Back To The Top
Old 09-12-2017, 10:04 AM   #18
savin yours
Pope & Young
 
savin yours's Avatar
 
Join Date: Feb 2007
Location: Texas
Hunt In: Lampasas
Default

In


Sent from my iPhone using Tapatalk
savin yours is offline   Reply With Quote Back To The Top
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:58 AM.


Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright 1999-2012, TexasBowhunter.com