You guys with the 6.5 PRC's what speeds are you seeing? And with what bullet.
Announcement
Collapse
No announcement yet.
The Official 2019 TBH APR Special Thread!
Collapse
X
-
Well, the cold bore round is 2874-2876 every time. Then the 2nd shot is 2942-2948 every time for 4 rounds. Then jumps to 2960-2968 EVERY TIME.
Strange, but very consistent. This is with 82 rounds through it so far.
54 grains rl-26 ,147 ELD-M(it doesnt shoot the 140's as well)at book length. .402" at 100 yds, .700" at 300yds.
Comment
-
Just picked up my tier 1 in 300 WM. This stick looks and feels amazing. Huge thanks to Robert for putting together such a great package! Can wait to get scope mounted up and rounds down range. Any body have any luck with Hornady Precision Hunter ELD-X in 300 WM 200 grain? Looking for a out of box load for CO upcoming elk season.
Comment
-
Originally posted by Pumpkinking12 View PostJust picked up my tier 1 in 300 WM. This stick looks and feels amazing. Huge thanks to Robert for putting together such a great package! Can wait to get scope mounted up and rounds down range. Any body have any luck with Hornady Precision Hunter ELD-X in 300 WM 200 grain? Looking for a out of box load for CO upcoming elk season.
Comment
-
Hi guys. Goofy question.
I mounted a Swarovski Z5 2.4-12x50 on a Tier 1 (Proof Research carbon barrel) using the 20 attached rail. When looking through the scope, I see the barrel. The rings used were Weaver Grand Slams (high). While this may not be the place I thought I’d throw out the question - any thoughts on which rings to use?
Thanks in advance!
Comment
-
Originally posted by gfulton View PostMake sure the ring bases are seated properly in the rail. Common problem. Ask me how I know!
I have a longer gun with a 24" barrel and Swaro Z6 3-18 x 50 in medium Talley lights and I will see the suppressor on 3-5 power. Do you only see it on low power?
Comment
-
Originally posted by bwhit View PostYes I would agree with you here. But either way you should be able to get that scope to mount fine with lower rings especially on top of that rail.
I have a longer gun with a 24" barrel and Swaro Z6 3-18 x 50 in medium Talley lights and I will see the suppressor on 3-5 power. Do you only see it on low power?
Interesting point - I will check different powers tonight and see if magnification makes a difference.
Comment
-
Originally posted by GyrPer1 View PostHi guys. Goofy question.
I mounted a Swarovski Z5 2.4-12x50 on a Tier 1 (Proof Research carbon barrel) using the 20 attached rail. When looking through the scope, I see the barrel. The rings used were Weaver Grand Slams (high). While this may not be the place I thought I’d throw out the question - any thoughts on which rings to use?
Thanks in advance!
Comment
-
Originally posted by jettech17 View PostWell, the cold bore round is 2874-2876 every time. Then the 2nd shot is 2942-2948 every time for 4 rounds. Then jumps to 2960-2968 EVERY TIME.
Strange, but very consistent. This is with 82 rounds through it so far.
54 grains rl-26 ,147 ELD-M(it doesnt shoot the 140's as well)at book length. .402" at 100 yds, .700" at 300yds.
Comment
Comment