Lowest Draw Weight for Mechanicals

[JW]

50lb with rage hypodermic. Worked like a charm.

What draw length?

[JT32]

29

[JW]

Lowest Draw Weight for Mechanicals

29

Ok that makes an enormous difference at 50 pounds over the average draw length of a younger person or a woman. A woman pulling 50 pounds at 25" draw and shooting the exact set up as you will average about 40fps than you with the exact same weight arrow.

[Loneaggie]

Depends on the mechanical. Big 2" Mechs.... 65#, yes I've shot them at 60#, but wasn't super happy with results. 1.5" Mechs.... 50# in a good three blade. But a lot of it has to do with angle of approach for the blade. If its steep you're chopping and need more KE to get it through, if its got a shallower angle, it will slice/cut and be more efficient. I've had good luck this off season with the G5 T3's on pigs. Much bigger entry holes than Reapers (which I shot for several years).