Reply
Go Back   TexasBowhunter.com Community Discussion Forums > Topics > Around the Campfire
 
Thread Tools Display Modes
Old 07-04-2012, 11:33 PM   #1
dac6933
Pope & Young
 
dac6933's Avatar
 
Join Date: Jan 2007
Location: Allen,Tx
Default Need brake light help on Jeep

Wifes 2004 Jeep Liberty. One brake light working this morning so I go change the bulb. Fuzes good, all 3 bulbs good but no brake lights. I did change the bulbs on all 3 lights. Parking lights and blinkers work fine. Any suggestions?
dac6933 is offline   Reply With Quote Back To The Top
Old 07-04-2012, 11:39 PM   #2
cricketfire46
Eight Point
 
cricketfire46's Avatar
 
Join Date: Jan 2010
Location: Gilmer
Hunt In: Morris co
Default

If its like my wrangler there's another fuse under the hood that is for the mfsw I believe, check that then check the multifunction switch somewhere around the brake pedal or steering column I can't remember exactly
cricketfire46 is offline   Reply With Quote Back To The Top
Old 07-04-2012, 11:39 PM   #3
gatorgar
Pope & Young
 
gatorgar's Avatar
 
Join Date: Feb 2009
Location: Roma
Hunt In: everywhere and anywhere you invite me to :)
Default

Relay maybe? Should be under the hood.
gatorgar is offline   Reply With Quote Back To The Top
Old 07-05-2012, 12:07 AM   #4
buckmastertexas
Ten Point
 
buckmastertexas's Avatar
 
Join Date: Dec 2009
Location: Orange, Texas
Hunt In: Sabine and Newton Counties
Default

If push comes to shove, run a jumper from the one that works to the bad one. Sounds like an open connection. As long as it does not interfere with the turn signal lights, it should work.
buckmastertexas is offline   Reply With Quote Back To The Top
Old 07-05-2012, 12:33 AM   #5
dac6933
Pope & Young
 
dac6933's Avatar
 
Join Date: Jan 2007
Location: Allen,Tx
Default

Quote:
Originally Posted by buckmastertexas View Post
If push comes to shove, run a jumper from the one that works to the bad one. Sounds like an open connection. As long as it does not interfere with the turn signal lights, it should work.
will check the other fuses and relay. I forgot to mention all 3 light not working now.
dac6933 is offline   Reply With Quote Back To The Top
Old 07-05-2012, 05:48 AM   #6
huntinfool
Pope & Young
 
huntinfool's Avatar
 
Join Date: Oct 2006
Location: Katy, Texas
Hunt In: SHNF, and anywhere you want to take me ;-)
Default

Try putting some dielectric grease @ the bulb connection.
huntinfool is offline   Reply With Quote Back To The Top
Old 07-05-2012, 05:55 AM   #7
arcfiddler
Four Point
 
Join Date: Oct 2009
Location: Brazoria
Hunt In: Finally inside the high fence
Default

If it's like the 2000 jeep grand Cherokee I used to have, get ready to buy a new light assembly.... Mine had some flexible circuit board something or the other in it that gave me similar problems. Bought an after market light and problem solved... Using the same bulbs. Hope that is not the deal with yours.
arcfiddler is offline   Reply With Quote Back To The Top
Old 07-05-2012, 07:13 AM   #8
Johnny Dangerr
Pope & Young
 
Johnny Dangerr's Avatar
 
Join Date: Dec 2009
Location: Houston
Hunt In: Mainly Guide Now
Default

Quote:
Originally Posted by arcfiddler View Post
If it's like the 2000 jeep grand Cherokee I used to have, get ready to buy a new light assembly.... Mine had some flexible circuit board something or the other in it that gave me similar problems. Bought an after market light and problem solved... Using the same bulbs. Hope that is not the deal with yours.
this
Johnny Dangerr is offline   Reply With Quote Back To The Top
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:21 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2018, vBulletin Solutions Inc.
Copyright 1999-2012, TexasBowhunter.com