Helim speed question

[Brack]

[QUOTE=ItsLeo;7952205]I agree with you that set up should be faster. Have a Mathews tech check the start position of your cam. A cam starting in the wrong position will suck the speed right out of a bow.



There is about a 3/8 inch hole on your cam. When you hold your bow up and look through the hole, if you see your cable bisecting that hole, then your cam rotation is correct.

[BURTONboy]

[quote=Brack;7972972]

I agree with you that set up should be faster. Have a Mathews tech check the start position of your cam. A cam starting in the wrong position will suck the speed right out of a bow.



There is about a 3/8 inch hole on your cam. When you hold your bow up and look through the hole, if you see your cable bisecting that hole, then your cam rotation is correct.

Yep, and mines dead center. Cam rotation is the first thing I checked before season to make sure all was well.