Go Back   TexasBowhunter.com Community Discussion Forums > Topics > Equipment and Tuning
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 07-25-2018, 07:15 AM   #36
Ten Point
enewman's Avatar
Join Date: May 2009
Location: Odessa TX
Hunt In: Any where I can

Originally Posted by Gunnyart View Post
Should I start my own thread? I have questions about testing methodologies.

What is the basic procedure for determining how much point weight my shaft can handle?
With a bare shaft everything from the 75-300 grain point seems to be flying about the same.
(310 grain arrow with no point or fletchings for total weight between 385 and 610)
this is the best method I've found to check tip weight to shaft. but bow must be put back into factory settings.

by doing this method you will find the correct reaction. now this is with precut arrows. the best way to get an arrow with correct reaction is the cut and trim method.

enewman is offline   Reply With Quote Back To The Top

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 04:08 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.
Copyright 1999-2012, TexasBowhunter.com