Need Help

[ptlmg]

Just bought some magnus snuffer screw on broadheads and am having a hard time sharpening them. I could really use some advise. I have heard that a 10" ******* file will do the trick, but I have also heard that it's not that easy. Thanks for any help you can provide.

[Brute Killer]

I use one of these for Wensel Woodsmans and Snuffers:

Move the b-head back and forth like this for several strokes until
the "factory grind" is smoothed out. Use lighter strokes and a finer stone
as you progress.

This is an 8" DMT bench stone, COARSE/X-COARSE. I finish with a 6" FINE

[Brute Killer]

It takes some work but the blade angles are kept constant/consistant.

[YJ Mike]

I use the accu-sharp on my Zwicky, does a real nice job. Use the accu-sharp until you get and edge then run it on a steel a few times to get it hair shaving sharp.

[SKLOSS]

Try a worksharp

[jerp]

I shoot cut-on-contact three blade heads. A few years ago I posted this on how I sharpen them:

http://discussions.texasbowhunter.com/forums/showthread.php?t=486302&highlight=scary

EDIT: just noticed - the OP was 11 years ago?