Reply
Go Back   TexasBowhunter.com Community Discussion Forums > Topics > D-I-Y Projects
 
Thread Tools Display Modes
Old 01-27-2007, 05:17 PM   #1
Steve W
Ten Point
 
Steve W's Avatar
 
Join Date: Oct 2006
Location: Magnolia,TX.
Default Target/Backstop

This topic came up in the forum the other day. My wife had taken pics of this, so i thought i would post the process.

finished product first so you don't have to wait if it's not what you like
Attachment 10912

the hardest part of this project is finding enough and the right size cardboard boxs.
mine where 42X48 (give or take), when flattend out. 42 is one because that's how wide the target is.

Materials

2-- landscape Timbers 8.00
2-- 2x8x8 treated 14.00
8-- 3/8 x 3 1/2 lag bolts 4.00
8-- 3/8 washers 1.00
1-- bad quickcrete 4.00
2-- 1x3 whitepine 6.00
____
37.00+ tax

Tools

screwgun
ratchet & 3/8 socket
drill
circular saw
posthole diggers
beer

1st
collect about 50 boxes really only neeed 30-35 with the size i found. but the xtra waits for replaceing the shotup cardboard.
a bandsaw made it easier but a jigsaw or circular saw would do it also.

cut cardboard. cut 8"w strips. i got 5 strips from each box.
Attachment 10913


did not get a picture of the frame being built, but basically i cut 1- 2x8x8 @ 45" and the other in half.
the 45" pieces would be the top and bottom of the holder. 42" + 3" due to the 2 side thicknesses.
the 48"pieces are the sides.

i wanted the center of the target about center of deer height.
on the landscape timbers i marked lines --18" for the hole then added 12" for the bottom shelf.
on the flat side of the timbers i screwed on the 48" 2x8 to each one. then took the 42" pieces and put them top and bottom.(top and bottom pices butt up to the timbers) drilled holes for the screws and then checked squareness and put the screws in.
measured the width from timber to timber and marked where the holes would go with spray paint, then dug, and placed in hole.

Attachment 10914

top piece of wood is because i wanted a roof so it would not ruin in the rain.
had a 12 foot piece of tin and 4- 2x4x8. went and bought the brackets. they bite. flimsie
probably another $25 in total cost.
cut the 1x3's so as too picture frame the front and back of the box area. screw to 2x4's. this keeps the cardboard from shifting when removing arrows.
BUT DO NOT SCREW TOP ONES yet.

after filling in and leveling. remove the screws holding the top and remove.
now you can start stacking in the cut cardboard.

Attachment 10915

stack cardboard till it's an 1" or 2" above the side 2x8's and place the top 2x8 on. run a couple of ratchet straps arouund and compress.

Attachment 10916
i should have put a hat on and pulled my shorts up.

while the straps are tight, screw in the top four bolts with washers.

that's about it, just make sure the roof edge is above your head height.

at the time of building, i was shooting 70lb pull on a Q2. at 3 steps back, it stopped a 30" carbon arrow 3-4" before the Blazers. with broadheads at 20-30 yards. about 8" sticks out the back side.
i also put 2 eye lag screws in the top corners to hold the target pillow bag.
hope this interests someone.
Steve W is offline   Reply With Quote Back To The Top
Old 01-27-2007, 05:25 PM   #2
Tmag
Pope & Young
 
Tmag's Avatar
 
Join Date: Oct 2006
Location: Tarkington Prairie, TX
Hunt In: Depends on the TPWD draw results!
Default

That's a neat looking backstop. Good job!
Tmag is offline   Reply With Quote Back To The Top
Old 01-27-2007, 10:22 PM   #3
SupaSlam
Eight Point
 
SupaSlam's Avatar
 
Join Date: Oct 2006
Location: Tx
Default

I really like it. Did you keep the cardboard 8" wide because of the 2X8's, or because you could get 5 pieces out of one box? Approximately how long does the cardboard last in the high stuck parts? I'm sure I will be sending you a couple of PM's when I go to build mine......looks nice though. Does the roof keep the CB dry for the most part?

Thx,
SS
SupaSlam is offline   Reply With Quote Back To The Top
Old 01-27-2007, 10:44 PM   #4
Ryan
Four Point
 
Ryan's Avatar
 
Join Date: Oct 2006
Location: Lake Conroe, TX
Default

Looks good Steve. I still have your hat in my garage and it looks like you need it. Please cover that head up before you take anymore pics. Maybe one day you can invite me over to see how many arrows that thing will take before we can destroy it.
Ryan is offline   Reply With Quote Back To The Top
Old 01-28-2007, 10:41 AM   #5
Steve W
Ten Point
 
Steve W's Avatar
 
Join Date: Oct 2006
Location: Magnolia,TX.
Default

SupaSlam-- 8"wide worked out both ways, because of the 2x8 and cuts per box. i figured it couldn't move around if it's wedged tight. doesn't move because of the shooting part, it's the removeing arrows part. when you get the thing full you kinda have to make a call on how many slates to go above the frame, so that compressing is tight and snug.
as far as holding up to shooting, better than i thought. i'm guessing that it being compressed is helping it stay tight.
it's not any good for tweaking your broadheads due too haveing to take them off to pull the arrow back out.
i still shoot field tips at that pillow bag, just cause it's easier to remove them.
it's been through a flood, the bottom 4" of cardboard soaked. the roof works well, Woodlands, Conroe area has had ALOT of rain since October when it was built. 2 foot overhang on each side.
PM me if you need answeres. i'll even take a close up pic of an area if you need it.
if you want a good drafting program FREE go to www.gogglesketchup.com and download sketchup 6.0 free version. cool program


Ryan-- you've have an open invite. maybe after Time change if there's still daylight left with the overtime you pull, you can stop by on your way to the house and shoot some. i'll wear a hat ! hairs longer now but still only brushed in on top.
Steve W is offline   Reply With Quote Back To The Top
Old 01-28-2007, 07:34 PM   #6
SupaSlam
Eight Point
 
SupaSlam's Avatar
 
Join Date: Oct 2006
Location: Tx
Default

Steve,

I appreciate the info and reply, and will deffinitely check out that site you posted. Once again, it's a great looking setup.

TC,
SS
SupaSlam is offline   Reply With Quote Back To The Top
Old 02-04-2007, 09:01 AM   #7
meshmover67
Ten Point
 
meshmover67's Avatar
 
Join Date: Nov 2006
Location: Spring TX, Morgantown WV
Hunt In: West Virginia
Default

i might have to try this
meshmover67 is offline   Reply With Quote Back To The Top
Old 03-05-2008, 09:02 PM   #8
donpablo
Ten Point
 
donpablo's Avatar
 
Join Date: Nov 2006
Location: Odessa
Hunt In: Iraan, Culberson County & Public Land
Red face I made one

I made one of these (actually my friend did most of the work and I helped). We moved into the city so I needed one and it turned out great. I made my roof a little different. Unfortunately, I made a poor choice for roof material (not to mention I failed to secure it as well as I should have) and the wind messed it up. Oh well, I'll have to redo the roof with some tin in the next week or two. Here's what it looked like before the piece broke off:
Attached Images
 
donpablo is offline   Reply With Quote Back To The Top
Old 03-05-2008, 10:39 PM   #9
Steve W
Ten Point
 
Steve W's Avatar
 
Join Date: Oct 2006
Location: Magnolia,TX.
Default

Looks good.
watch out for repetitive use of one location, no pass thru's but i have buried to the fletchings now with a years worth of use. That brick wall could use a piece of plywood so you don't splinter a carbon shaft if it happens.
Steve W is offline   Reply With Quote Back To The Top
Old 03-05-2008, 10:43 PM   #10
Steve W
Ten Point
 
Steve W's Avatar
 
Join Date: Oct 2006
Location: Magnolia,TX.
Default

forgot that i had cleaned out my attachments thinking i was saving server space. case of the DA's solved.

Name:  frame25%.jpg
Views: 2523
Size:  72.7 KB

Name:  putting together2.jpg
Views: 2618
Size:  52.1 KB

Name:  strapped 2.jpg
Views: 2528
Size:  36.5 KB

Name:  finished target2.jpg
Views: 2517
Size:  42.7 KB
Steve W is offline   Reply With Quote Back To The Top
Old 03-06-2008, 06:40 PM   #11
slayer
Pope & Young
 
slayer's Avatar
 
Join Date: Feb 2008
Location: Arlington
Hunt In: Knox & Palo Pinto County
Default

Awesome, need to build one like that for my backyard, so I don't keep making the neighbors mad.
slayer is offline   Reply With Quote Back To The Top
Old 03-06-2008, 07:12 PM   #12
Green Arrow
Ten Point
 
Green Arrow's Avatar
 
Join Date: Nov 2007
Location: Leander, TX
Hunt In: Sutton and Willimson
Default

great job,i should build one of those.
Green Arrow is offline   Reply With Quote Back To The Top
Old 04-12-2008, 02:29 PM   #13
donpablo
Ten Point
 
donpablo's Avatar
 
Join Date: Nov 2006
Location: Odessa
Hunt In: Iraan, Culberson County & Public Land
Default Done

Well, I fixed the roof using the same material but this time I secured it better. Here it is:
Attached Images
 
donpablo is offline   Reply With Quote Back To The Top
Old 04-18-2008, 05:32 PM   #14
arrowsmack324
Ten Point
 
arrowsmack324's Avatar
 
Join Date: Mar 2008
Location: Spring
Hunt In: 100% Public
Default

Great Idea.
arrowsmack324 is offline   Reply With Quote Back To The Top
Old 04-21-2008, 09:31 AM   #15
donpablo
Ten Point
 
donpablo's Avatar
 
Join Date: Nov 2006
Location: Odessa
Hunt In: Iraan, Culberson County & Public Land
Default

BTW Steve,

I never did thank you for posting this. If you hadn't I'd be out a fortune in indoor range fees. Thanks.

Pablo
donpablo is offline   Reply With Quote Back To The Top
Old 04-21-2008, 09:40 AM   #16
Snapper
Pope & Young
 
Snapper's Avatar
 
Join Date: Oct 2006
Location: Katy, Tx
Default

Those are very nice! I need to put it on the list...with the rest of the things that I can't seem to find the tme to do. Let me see....build high rack seat for ranger...target backstop....go fishing....clean garage....build new bow blinds...cooking disc...big @ss feeder....get new camera for photography contest....it goes on and on. I love this place.LOL!
Snapper is offline   Reply With Quote Back To The Top
Old 04-21-2008, 09:58 AM   #17
Brad75
Ten Point
 
Brad75's Avatar
 
Join Date: Feb 2007
Location: Dos Condados Ranch Charlotte, Texas
Hunt In: Dos Condados Ranch and Everywhere I can!!
Default

Good job guys!!
Brad75 is offline   Reply With Quote Back To The Top
Old 04-22-2008, 09:43 PM   #18
bowhuntertex
Pope & Young
 
bowhuntertex's Avatar
 
Join Date: Oct 2006
Location: Wimberley
Hunt In: Where ever the wind takes me......
Default

very nice job.........I could use a few of those at my casa.........
bowhuntertex is offline   Reply With Quote Back To The Top
Old 04-23-2008, 10:45 PM   #19
organpiercer
Six Point
 
organpiercer's Avatar
 
Join Date: Oct 2006
Location: Austin
Hunt In: Anywhere
Default

those are great...
looks like another project to put on the list.
organpiercer is offline   Reply With Quote Back To The Top
Old 01-25-2012, 11:18 PM   #20
Archer-Boy
Spike
 
Archer-Boy's Avatar
 
Join Date: Jan 2012
Location: Sugar Land, TX
Hunt In: Lookin for somewhere to hunt outside Houston
Default

nice.. great details on the design.
Archer-Boy is offline   Reply With Quote Back To The Top
Old 12-02-2017, 09:48 PM   #21
donpablo
Ten Point
 
donpablo's Avatar
 
Join Date: Nov 2006
Location: Odessa
Hunt In: Iraan, Culberson County & Public Land
Default Redesigned It

The cardboard on mine wore out and I didn't have the time or motivation to re-cut all that cardboard. So I decided to redesign it. Took out the cardboard and replaced it with hanging rubber mats. I've read about a lot of guys on here using a 3/4" one but I used 2 1/2" just in case. I could have stopped there but since I have GSPs (one of which is barely a year old) and I didn't want rubber pieces all over the yard I made a hinged door on the front and one that slides out on the back.












The poundage on my bow is set so low when I missed (at 45 yds) my arrow didn't even penetrate the first mat.
donpablo is offline   Reply With Quote Back To The Top
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:08 AM.


Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright 1999-2012, TexasBowhunter.com