What kind of string for these limb tips? - TexasBowhunter.com Community Discussion Forums

Briar Friar · 06-18-2017, 10:46 AM

AMF Falcon 62"

Im new to trad and need a sanity check and a new string.

Briar Friar · 06-18-2017, 10:49 AM

Other side

Briar Friar · 06-18-2017, 10:57 AM

I got this string from the archery shop. It took 5 times for them to get me the correct length string. I was distracted and didnt see the D97...I had ordered a B55 or B50...whichever they could get in either flemish or endless.

It is a long story of the hokey pokey...and Im thinking its still not right.

If it is the wrong material...

Can I get somebody to build me a string, please? I will pay whatever is fair.

This is a buddys bow and I want to hook him up with a new string but would like to give someone in Texas my money.

DRT · 06-18-2017, 11:05 AM

String tips aren't re-enforced so I would assume Dacron is the safer choose for the bow.

Sent from my SM-J710MN using Tapatalk

CRM_95 · 06-18-2017, 11:34 AM

Yeah just looking at the tips I don't think that bow is made for FF material. I'd get with Daniel and have him build you a string. I could be wrong but I think most bows made for FF strings have reinforced tips.

stickbowcoop · 06-18-2017, 11:43 AM

I would not use that material on that bow, you want Dacron. If I didn't just have surgery a week ago I would gladly build you a string. But it will be quite awhile before I can. http://www.3riversarchery.com/ is a great source for traditional archery gear.

El Paisano · 06-18-2017, 11:52 AM

Yes. B55 or B50.

El Paisano · 06-18-2017, 11:54 AM

If that is a 62" Wing Falcon you will need probably 58" to 58 1/2" string length (stretched).

Briar Friar · 06-18-2017, 03:32 PM

Quote:

Originally Posted by stickbowcoop

I would not use that material on that bow, you want Dacron. If I didn't just have surgery a week ago I would gladly build you a string. But it will be quite awhile before I can. http://www.3riversarchery.com/ is a great source for traditional archery gear.

God bless you a speedy recovery.

Briar Friar · 06-18-2017, 03:39 PM

Thank yall for the assurance and info. I know I could get RMS Archery in Wheatridge, CO to whup me up one pretty quick. Ive done business with them and shot this happenstance across their bow and they said NO PROBLEM. I was trying to give a local business my money and support them but...repeated lack of attention to detail is going to cause me to go elsewheres.

I have no use for a D97 flemish twist string for a 62" AMO recurve. Ill give it to anyone for free.

Briar Friar · 06-18-2017, 03:41 PM

Quote:

Originally Posted by El Paisano

If that is a 62" Wing Falcon you will need probably 58" to 58 1/2" string length (stretched).

It is a Wing Falcon and thats what I was figuring on string length too. Gracias Senor.

spidermonkey · 06-18-2017, 06:13 PM

Briar, another option is Michael Harbison outta Louisiana. Quick return, excellent quality, and VERY fair price! As with most string makers, he can make you whatever you want, out of any material that you want. Just let him know what ya got, hes a good guy to deal with. Michael Harbison, Bayou Trad Archery. Good Huntin, and God Bless, Rusty

DRT · 06-18-2017, 06:45 PM

I going to order another string from DanielB89. It's summer so mathe his turn around will be better. He builds a good string.

Sent from my SM-J710MN using Tapatalk

Danielb89 · 06-18-2017, 07:40 PM

Quote:

Originally Posted by DRT

I going to order another string from DanielB89. It's summer so mathe his turn around will be better. He builds a good string.

Sent from my SM-J710MN using Tapatalk

It is down to about a week atm. That's if i'm in the shop and not on vacation that is.

If anyone ever needs one quickly, you just need to be sure you contact me and let me know. Now just put it on the order form. I don't look at those until I print the order.

Daniel

Briar Friar · 06-19-2017, 10:10 AM

Thanks Rusty. Thanks DRT...Now I see who the "Daniel" is...I will be sending him a PM to do business.

Howdy Daniel!

Offer for a free 62" recurve D97 flemish twist still stands. Top dollar rate of Free.99!

DRT · 06-19-2017, 10:18 AM

Quote:

Originally Posted by Danielb89

It is down to about a week atm. That's if i'm in the shop and not on vacation that is.

If anyone ever needs one quickly, you just need to be sure you contact me and let me know. Now just put it on the order form. I don't look at those until I print the order.

Daniel

I know it's tough for teachers especially at the beginning and end of the school year. That's why I waited.

Sent from my SM-J710MN using Tapatalk

06-18-2017, 10:46 AM	#1
Briar Friar Ten Point Join Date: May 2015 Location: Texas Hunt In: San Gabriel, Colorado and Rio Grande watersheds	What kind of string for these limb tips? AMF Falcon 62" Im new to trad and need a sanity check and a new string. Attached Images

06-18-2017, 10:49 AM	#2
Briar Friar Ten Point Join Date: May 2015 Location: Texas Hunt In: San Gabriel, Colorado and Rio Grande watersheds	Other side Attached Images

06-18-2017, 10:57 AM	#3
Briar Friar Ten Point Join Date: May 2015 Location: Texas Hunt In: San Gabriel, Colorado and Rio Grande watersheds	I got this string from the archery shop. It took 5 times for them to get me the correct length string. I was distracted and didnt see the D97...I had ordered a B55 or B50...whichever they could get in either flemish or endless. It is a long story of the hokey pokey...and Im thinking its still not right. If it is the wrong material... Can I get somebody to build me a string, please? I will pay whatever is fair. This is a buddys bow and I want to hook him up with a new string but would like to give someone in Texas my money. Attached Images Last edited by Briar Friar; 06-18-2017 at 10:58 AM.. Reason: DeleteSpake

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-18-2017, 11:05 AM	#4
DRT Pope & Young Join Date: Dec 2009 Location: Fort Worth, Tx Hunt In: Jones County and Missouri	String tips aren't re-enforced so I would assume Dacron is the safer choose for the bow. Sent from my SM-J710MN using Tapatalk

06-18-2017, 11:34 AM	#5
CRM_95 Pope & Young Join Date: Aug 2012 Location: East TX Hunt In: East TX	Yeah just looking at the tips I don't think that bow is made for FF material. I'd get with Daniel and have him build you a string. I could be wrong but I think most bows made for FF strings have reinforced tips.

06-18-2017, 11:43 AM	#6
stickbowcoop Eight Point Join Date: Feb 2017 Location: Springtown TX Hunt In: Hunting for a place to hunt	I would not use that material on that bow, you want Dacron. If I didn't just have surgery a week ago I would gladly build you a string. But it will be quite awhile before I can. http://www.3riversarchery.com/ is a great source for traditional archery gear.

06-18-2017, 11:52 AM	#7
El Paisano Ten Point Join Date: Dec 2007 Location: Conway, AR Hunt In: Texas-Arkansas	Yes. B55 or B50.

06-18-2017, 11:54 AM	#8
El Paisano Ten Point Join Date: Dec 2007 Location: Conway, AR Hunt In: Texas-Arkansas	If that is a 62" Wing Falcon you will need probably 58" to 58 1/2" string length (stretched).

06-18-2017, 03:39 PM	#10
Briar Friar Ten Point Join Date: May 2015 Location: Texas Hunt In: San Gabriel, Colorado and Rio Grande watersheds	Thank yall for the assurance and info. I know I could get RMS Archery in Wheatridge, CO to whup me up one pretty quick. Ive done business with them and shot this happenstance across their bow and they said NO PROBLEM. I was trying to give a local business my money and support them but...repeated lack of attention to detail is going to cause me to go elsewheres. I have no use for a D97 flemish twist string for a 62" AMO recurve. Ill give it to anyone for free.

06-18-2017, 06:13 PM	#12
spidermonkey Eight Point Join Date: Sep 2012 Location: northeast texas Hunt In: northeast and central texas	Briar, another option is Michael Harbison outta Louisiana. Quick return, excellent quality, and VERY fair price! As with most string makers, he can make you whatever you want, out of any material that you want. Just let him know what ya got, hes a good guy to deal with. Michael Harbison, Bayou Trad Archery. Good Huntin, and God Bless, Rusty

06-18-2017, 06:45 PM	#13
DRT Pope & Young Join Date: Dec 2009 Location: Fort Worth, Tx Hunt In: Jones County and Missouri	I going to order another string from DanielB89. It's summer so mathe his turn around will be better. He builds a good string. Sent from my SM-J710MN using Tapatalk

06-19-2017, 10:10 AM	#15
Briar Friar Ten Point Join Date: May 2015 Location: Texas Hunt In: San Gabriel, Colorado and Rio Grande watersheds	Thanks Rusty. Thanks DRT...Now I see who the "Daniel" is...I will be sending him a PM to do business. Howdy Daniel! Offer for a free 62" recurve D97 flemish twist still stands. Top dollar rate of Free.99!