Originally posted by mikemorvan
View Post
Announcement
Collapse
No announcement yet.
Travel Trailer Rebuild
Collapse
X
-
Originally posted by Bigyummy77 View PostGreat idea with the flashing, wich made me think, maybe tar paper between the flashing and wood to seal all the spaces... just an idea that popped in my head. Looks great so far! Can't wait to see it come together!
As much as i'd like to change the hubs, i have too much invested in the wheels i have, and there is NO after market for those type of wheels. At some point (before i hit the road) i'll have to get a spare rim in the same style. Oh well.
I hope to get more done tomorrow after mowing grass and changing shocks on the truck. Thanks for the comments and suggestions.
Comment
-
Originally posted by mikemorvan View PostFelt is a great idea. I can get the material from scrap at work. I'll be doing that.
As much as i'd like to change the hubs, i have too much invested in the wheels i have, and there is NO after market for those type of wheels. At some point (before i hit the road) i'll have to get a spare rim in the same style. Oh well.
I hope to get more done tomorrow after mowing grass and changing shocks on the truck. Thanks for the comments and suggestions.
Comment
-
I blocked up the trailer and removed the wheels today. Makes it easier to work on. I goy the tin in the bottom. It's noy as tight as i'd like, but it's about as good as i can do by myself. I laid two of the floor joists in to give an idera of my plan. I'll have a center joist from front to back. I've got to build a rim around the perimeter of the frame. Then 2x6's will go from side to side. The area in front of the tires will cantilever about 12" past the main frame. It's just sitting there now. No lumber is fastened. When done, i'll have about a 4.5" floor space to insulate. And so it goes.
Oh yeah - i recommend wearing chain mail gloves when cutting sheet metal.
Comment
-
Goal for the weekend is to get subfloor done and ready to go vertical next weekend. So far today i've got the felt down for a vapor barrier, and laid in "floor joists". I added a couple of pieces of angle iron lagged into the frame for additional support. Side joists are lagged into the steel frame. More to follow...
Comment
Comment