I was at the dsc and seen that nosler is coming out with the 22 nosler for a ar 15 platform. Uses the 223 bolt but the case is fatter. Needs a 6.8 mag.
Wonder how they're dealing with pressures. The 6.8 and 6.5 bolts went through a little window of trouble did they not. Most are beefed up now or 9130 steel or both. How's this one gonna run with standard 556 bolts?
Wonder how they're dealing with pressures. The 6.8 and 6.5 bolts went through a little window of trouble did they not. Most are beefed up now or 9130 steel or both. How's this one gonna run with standard 556 bolts?
Well it has the sandard 223 bolt so it has thicker walls than the 6.8 and the 6.5 I think.
Wonder how they're dealing with pressures. The 6.8 and 6.5 bolts went through a little window of trouble did they not. Most are beefed up now or 9130 steel or both. How's this one gonna run with standard 556 bolts?
Those bolts were failing due to the larger bolt face diameter and the reduced amount of material required on the bolt with them.
Comment