Announcement

Collapse
No announcement yet.

Subsonic Recipe For 6.5 Grendel

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Subsonic Recipe For 6.5 Grendel

    Does anyone have a good recipe for the 6.5 Grendel? I have Hornady or Lupua brass, so anything compatible would work.
    Thanks!

    #2
    There are some out there, I haven't tried subsonic in the Grendel. The AR I have has a 24 inch barrel and more success is had cycling with mid length or short gas setups.

    Here are a couple threads from another site about subsonic Grendel loads

    http://www.65grendel.com/forum/showt...light=subsonic

    http://www.65grendel.com/forum/showt...sonic-Load-yet

    Comment


      #3
      Originally posted by kmon View Post
      There are some out there, I haven't tried subsonic in the Grendel. The AR I have has a 24 inch barrel and more success is had cycling with mid length or short gas setups.

      Here are a couple threads from another site about subsonic Grendel loads

      http://www.65grendel.com/forum/showt...light=subsonic

      http://www.65grendel.com/forum/showt...sonic-Load-yet
      Thanks! There were a couple of good videos there.
      Last edited by Ron; 12-07-2017, 09:50 AM.

      Comment


        #4
        If you poke around in those threads and others on that site you will find a good bit of information on subsonic loads for your Grendel

        Comment

        Working...
        X