Scope mounts for a AR.

[tazhunter0]

Why use a mount vs rings straight to the top of the receiver? Will it not be a dedicated setup?

It will be a dedicated set up, so individual mounts are possible. Just wanted options.

[Backwoods101]

Ttt, need mounts for my new AR-10 [emoji41]


Sent from my iPhone using Tapatalk

[Reedimus]

Still have an extra vortex I would sell

[Antlers86]

Hey Chris I have the Burris mount. Can hook you up cheap!

[kumathebear]

Leoupold one piece, great for AR's

[Backwoods101]

Hey Chris I have the Burris mount. Can hook you up cheap!

If he's not interested, pm me the details.


Sent from my iPhone using Tapatalk

[tazhunter0]

Hey Chris I have the Burris mount. Can hook you up cheap!

Mine is takin care of.

[Tuffbroadhead]

Larue is the only way to go...

[ultralite09]

Another vote from me for ADM Recon. I've taken a scope off to put a thermal on multiple times before and never have lost zero after swapping 8 times.

Sent from my SAMSUNG-SM-G935A using Tapatalk

[OldRiverRat]

i have the nikon m-223 one piece and it has worked great

[TexMax]

Why use a mount vs rings straight to the top of the receiver? Will it not be a dedicated setup?

1. Finding a set that's tall enough can be difficult but worked around 2. Unless you want to mount the front ring to your rail (don't do that) getting the scope far enough forward for good eye relief is pretty much impossible 3. If you go qd you can break your rifle down into a more packable state, swap optics, or dump the scope for your backup sights in the event of a failure or if a situation would favor it over an optic (3 is a little more obscure)


Someone with a crooked neck will come and disagree but those are my reasons.

[smokin6.7]

Larue here.

[mzurovec]

I've only used one piece mounts, and have owned some of the cheapest up to a $120 Leupold. For the recreational shooter like myself, they have all done fine with no issues holding zero. The last one I bought was on sale for $20 on Midway, marked down from $60, and it has been great!

[texglocker]

GG&G quick detach on my AR Varmint rig has worked well so far and has returned to zero when removed a couple of times.

[Frankhunter]

Nicon m223 works great