Knock off the sheen a little with 0000, or leave it glossy?
Better than steel-wool IMO to take off some of the gloss is a brown paper bag. Cut out a piece and wrap it around a sponge and you'll see the shine starting dull. You can wet it with drop or two of tru-oil or use it dry. A little paste wax when you are done.
If you are thinking about rebluing it the oxpho blue is super easy and will make that gun look really good. I've done several complete re-blue jobs and you will have to really look to tell it's not factory.
Better than steel-wool IMO to take off some of the gloss is a brown paper bag. Cut out a piece and wrap it around a sponge and you'll see the shine starting dull. You can wet it with drop or two of tru-oil or use it dry. A little paste wax when you are done.
If you are thinking about rebluing it the oxpho blue is super easy and will make that gun look really good. I've done several complete re-blue jobs and you will have to really look to tell it's not factory.
I would leave the metal alone with the original patina that is on it. Go buy some bullets and shoot it would be best course of action I think.
Yessir. I ran a couple patches through it as soon as i got home and shot it. That is how i determined to mess with it at all. It still shoots, and well.
It is done, now and forever. 400 grit to rough her back up for good adhesion, slapped on another coat of Tru Oil, thoroughly cleaned the metal parts, and put it back together. I rushed the final coat in frustration, and there are imperfections, but its done.
Even with the new bottle of Tru Oil, some fresh sandpaper, and a couple boxes of CCI Quiet... I think it came to under $100
Im siding with the majority in this thread. Its mechanically sound, needs to remain old in appearance, and cant be "cooler" than my son's first 22.
Thank you all for the opinions and tips! I am happy with what it is, and I refuse to do anything else but shoot it and let my boy outshoot his daddy, of course.
Comment