The serving on my buss cable keeps breaking/getting cut right where it breaks over the module. I've had the bow about 2 weeks and my dealer has already redone the serving twice... 20-30 shots later this is what it looks like. Season is about to start and I'm really worried this won't be fixed in time.
Announcement
Collapse
No announcement yet.
Need help with the new hoyt
Collapse
X
-
If its leaning it should be the adjustment to that side. Should add more twist to the string unless that puts the bow out of spec then you would need to let a twist out of the opposite side of the lean to bring it back straight..
I think i seen some where that there was a bearing issue.. Might check that as well. Idk if it pertained to one of the newer bows
what bow are you hav
ing the issues with ?
Comment
-
Well there was no spacer on the cable side of the bottom cam. I left it with him last night and will go back tonight to pick it up... I've been looking at the spacer missing for a few days but automatically assumed there wasn't supposed to be one since that's how it came straight out of the box(now I know better and feel pretty ignorant looking back).... I've been shooting for a long time but never gotten into the actual mechanics, guess it's time for me to learn.... And when my draw length was set the string stop wasn't moved and I shot it over the weekend like that. I knew it didn't feel right but new bow and pride wouldn't let me say it felt to heavy lol......
I'm hoping this will fix it... He spent lots of time trying to get it right and I guess without the spacer the cam just goes crazy during the shot and hitting the buss, he just missed it, everyone is human,,,
Comment
-
Originally posted by DoubleGArchery View PostRoper,can you put a picture of the back of the cams,both top and bottom, on here? See if the modules are the same and see if the draw stop is in the correct hole. Just something to check.
Comment
-
My lower 27.5 mod for my Nitrum Turbo was treating my factory buss serving pretty bad. Bought a new set (60X of course!) served with halo and it's holding up good compared to the angel majesty Hoyt uses. Also, my module had a sharp edge on it when I installed it. I took a jeweler's file and broke the edge which helped a ton.Last edited by muddyfuzzy; 09-22-2015, 12:28 PM.
Comment
Comment