Very pretty
Announcement
Collapse
No announcement yet.
New (to me) Black Widow SAX
Collapse
X
-
Originally posted by Dry Bones View PostYou might could save yourself a little more cash and just make them. I did for my takedown, though I did not do anything cool like scorch and silver.
I just took a large set of sheds, cut the length I wanted pilot the hole in the bottom where the screw head comes in and then set in JB Weld. I did engrave my initials and use a dark polish t darken the white.
If you will square off the shoulders of your bolt a little and not oversize the tap, then the bolt will fit snug and reduces the chance of twisting out the center.
Comment
-
Originally posted by Dry Bones View PostYou might could save yourself a little more cash and just make them. I did for my takedown, though I did not do anything cool like scorch and silver.
I just took a large set of sheds, cut the length I wanted pilot the hole in the bottom where the screw head comes in and then set in JB Weld. I did engrave my initials and use a dark polish t darken the white.
If you will square off the shoulders of your bolt a little and not oversize the tap, then the bolt will fit snug and reduces the chance of twisting out the center.
Best of luck and again, a beauty of a Widow.
Comment
-
Originally posted by yleecoyote23 View PostHey Louis, I was thinking about your SAXS when I bought this one!! Didn't you have antler bolts on it? I was thinking it was yours I had seen with them....may have to start shopping for a pair for this one!
Comment
Comment