Been wanting to do this for a while and finally starting acquiring everything I needed for it. This was my first test in testing seating depth all at the same charge.
Tikka T3 Lite .243
Hornady Brass
CCI 200 Primers
37.5 grains of Varget
87 grain Berger VLD
Top left is .010" off the lands
Top right .030" off
Bottom left .040" off
Bottom right .050" off
Middle .060" off
The shot to the right on the top left target is my fouler from a factory Hornady load.
Looks like I'm going to load another 4 at .010" and the jump to .005" and see what happens. Then off to charge weights. This is already addicting and I'm actually pretty pleased so far!
Sent from my iPhone using Tapatalk
Tikka T3 Lite .243
Hornady Brass
CCI 200 Primers
37.5 grains of Varget
87 grain Berger VLD
Top left is .010" off the lands
Top right .030" off
Bottom left .040" off
Bottom right .050" off
Middle .060" off
The shot to the right on the top left target is my fouler from a factory Hornady load.
Looks like I'm going to load another 4 at .010" and the jump to .005" and see what happens. Then off to charge weights. This is already addicting and I'm actually pretty pleased so far!
Sent from my iPhone using Tapatalk
Comment