Big Bertha #2 Protein Feeder

[TXBRASS]

Dryden...100 miles west of DelRio.... 5 miles north of Mexico

Sent from my SAMSUNG-SM-N910A using Tapatalk

[RascalArms]

Very nice...but I'd have to take out a loan just to fill that thing.

[Mertzon Man]

Cool idea, looks great!

[hammer63]

Kudos man! Great job.

[TXBRASS]

I went ahead and welded a bold/nut set-screw on each leg to tighten it in place. I also cut a piece of thick rubber to put under each foot. I drilled a hole in the rubber and then cut holes using a torch on the feet at an angle inward. I then drove 18" pieces of rebar thru the feet and into the ground. Even empty, it didn't move and full it was super stout.

Sent from my SAMSUNG-SM-N910A using Tapatalk

[rjbowmaster]

Nice


Sent from my iPhone using Tapatalk

[aggie11]

Nice build! Did you put a funnel in it or just leave the bottom flat?

[TXBRASS]

I left it flat. The 3 holes are about 3.75"x3.75" and semi in the middle so I figure I can sweep what's left down the tubes each time I refill....

Sent from my SAMSUNG-SM-N910A using Tapatalk

[TXBRASS]

Loved to see all these tracks and that she is working like a champ. They didn't quite have her empty, but seem to be hitting her hard now!

[acwirz]

No trailcam pics?!?! [emoji3]


Sent from my iPhone using Tapatalk

[TXBRASS]

Sorry....I just put out trail cams this trip.... they grow a lot later out there so I will get the peak of growth on camera over the next 70 days....

Sent from my SAMSUNG-SM-N910A using Tapatalk

[TXBRASS]

[brianlg31]

How far off the ground are the feed tubes?

[TXBRASS]

I can't remember for sure, but I think I made them 38" off ground.


Sent from my iPhone using Tapatalk

[TXBRASS]

Camera got jacked so my pics are crooked.


Sent from my iPhone using Tapatalk