Originally posted by huntinfool
View Post
Announcement
Collapse
No announcement yet.
Setting up an ILF bow.
Collapse
X
-
Originally posted by TMiddleton View PostI would think 500's would be closer to what you need to be shooting. Did y'all have time to bare shaft those 400's?
Sent from my SAMSUNG-SM-G920A using Tapatalk
Not sure if his heart wasn't in it or if after seeing these fly he knew we were good.
We didn't shoot any 500's.
Right now, the arrows I have are flying good.
So I guess I'll stay here for a bit.
Sent from my XT1650 using Tapatalk
Comment
-
Originally posted by huntinfool View PostWe did to an extent.
Not sure if his heart wasn't in it or if after seeing these fly he knew we were good.
We didn't shoot any 500's.
Right now, the arrows I have are flying good.
So I guess I'll stay here for a bit.
Sent from my XT1650 using Tapatalk
Rick
Comment
-
Originally posted by RickBarbee View PostIn the end, what shoots is what shoots, and what shoots is all that matters.
Rick
I try my best to not "guide the guide"
He said they were good, and all I needed to do now is practice. So, that's what I'm going to do!
Sent from my XT1650 using Tapatalk
Comment
-
Originally posted by huntinfool View PostThanks.
I try my best to not "guide the guide"
He said they were good, and all I needed to do now is practice. So, that's what I'm going to do!
Sent from my XT1650 using Tapatalk
Now to get consistent...that's something else. Keep at it and good shooting!
Todd
Comment
-
Originally posted by twillgo View PostIf you already have the right arrows for you and your setup, you are way ahead of the curve! It took me forever and a day to get it right without any guidance.
Now to get consistent...that's something else. Keep at it and good shooting!
Todd
I knew it was going to be a pain. Especially since we had already tried it on the other bow.
But since we knew most of the variables starting out, he kind of knew where we needed to be.
Luckily I hadn't cut off all my arrows!
Now I just need to finish the inserts and buy the tips.
Hope to have that done soon.
Got my target moved in front of the backstop Sunday. Should have the tin to cover it in a week or so. Then just need to rig some lights. Thinking I may just get a battery and a couple LED strips.
We use them here at work and I know they will put out quite a bit of light. I can rig up a solar panel on a battery and put a switch on it. ( Might even make a 12v photo electric eye to turn it on, once it gets dark) But maybe just a manual switch.
Then, if needed I can get one of those clamp on lights to shine the area where I'm standing. Although there is a light on the building...if it works. I'll have to check tonight.
Should be up and running and able to shoot into dark in about 2-3 weeks. ( Working in the dark the next few weeks)
I'll keep y'all updated on the progress.
Sent from my XT1650 using Tapatalk
Comment
-
Originally posted by huntinfool View PostThanks.
I try my best to not "guide the guide"
He said they were good, and all I needed to do now is practice. So, that's what I'm going to do!
Sent from my XT1650 using Tapatalk
That is most likely correct. You cannot do any serious tuning until you have somewhat consistent form. I bet money you will be doing some fine tuning later on that will make you change a few things!
Go practice and have some fun!
Bisch
Sent from my iPhone using Tapatalk Pro
Comment
-
So I've been looking at the dirt nap gear heads. Just found out they have a 150 grain head. Would 5 grains make that much of a difference if I shoot the field tips and broad heads the same weight? Or do I need to find 145 grain tips and broad heads?
So far my form is just fine, I just need to remember to not dip my head. Otherwise everything else is fine. Practice is what I'm going to be working on. Getting it all down to where it's muscle memory.
But first I've got to have something to shoot at!
Sent from my XT1650 using Tapatalk
Comment
-
Talked to my buddy and asked if I could go 150, he said no problem. So, I think I'm going to look at the dirt nap DRT HD's. They come in 150 grains. Should be able to get some FP's soon.
Work is really stretching me out. Plus it's been raining almost every day.
Ugh.
Picked up a different arrow rest, hope to get it on tonight.
Sent from my XT1650 using Tapatalk
Comment
-
Originally posted by Bisch View PostThere are lots of choices in 150gr broadhead. Whichever one you go with, just make sure it is as sharp as it can be, and be able to put it in the right place on the critter!
Bisch
Sent from my iPhone using Tapatalk Pro
I don't shoot anything but SHARP broad heads.
Sent from my XT1650 using Tapatalk
Comment
Comment