How about a trade thread for reloading components.

[rossivey]

Still got 1000 WLR Primers

[K. Lane]

I have 300 mixed headstamp .270 brass.... Once fired.

Brand new unopened Lee 3 die set with shell holder and powder dump.
Slightly used Lee collet neck sizing die for the. .270

1 box of the Ted migrant ammo....... 130gr tsx

[hardtner]

I'm looking for RCBS neck sizer dies for .308 and .25-06

[Jeremy7306]

I'm looking for a Forster original case trimmer. Pm me if anyone happens to have one. Thanks.

[Habanarrow]

Looking for 30-30 shells.
Thank you

[Texas Grown]

I have a set of RCBS .41 Mag dies. This is an older set. All steel, not carbide. So case lube will be needed before sizing, $20 to your door.

Looking for 7-30 Waters neck sizing die. And 7-30 Waters full length die set.
Looking for .35 Rem neck sizing die.

also looking for Hornady 45 cal .452 ida. 250gr. XTP
Hornady .41 cal 210gr XTP

[oneforthewall]

9mm and sig ammo gone.
anyone have any h335 powder?
or possibly some wc844?

I have an unopened pound of h335, I need a pound of Ramshot Tac

[Bushwacker]

I have 250 once fired 45 brass. Mixed headstamp. Has been through tumbler.

[Mike D]

I have an unopened pound of h335, I need a pound of Ramshot Tac

I have a pound of TAC that I can spare. Do you have any other powder to trade? I don't use 335.

[Mike D]

I need at least 100 pcs of Lapua 22-250 brass. I'm not interested in any other brand at this time.

[Mcb4]

I'm looking for a Forster original case trimmer. Pm me if anyone happens to have one. Thanks.

There is one on the Texas Hunting Forum right now for $90 shipped

[Mcb4]

Does anyone have any Accurate 1680 or know where I could find it?

[oneforthewall]

I have a pound of TAC that I can spare. Do you have any other powder to trade? I don't use 335.

I have rl19 but no 17, pm me a list of what you use and I'll see what I have.

[oneforthewall]

I have a pound of TAC that I can spare. Do you have any other powder to trade? I don't use 335.

PM inbound

[Bushwacker]

I need .380 brass. Anyone willing to trade for 9mm,40 or 45?