My current arrows are 11.5% FOC. I am wanting to bump this up to around 16-18% FOC. My draw length is 27" and I can cut about 1-3/4" off of my current arrows, but I need someone to run them through the arrow spine program to see if by cutting 1-3/4" off, I will be able to add enough weight to the front and not be under spined. Current bow and arrow specs below.
My plan would be to cut from the front and install new gold tip inserts so that i can screw in the desired weights, thus being able to keep all of my 100gr BH and FP.
Current bow:
Mathews Z3
IBO 330 FPS
70lbs
27” draw
Current arrow:
Beeman ICS Patriot
27-3/4” long
9.3 GPI
340 Spine
100gr BH and FP
(3) 2" Blazers
Standard aluminum insert
Lumenock
414g
11.5% FOC
Is my plan achievable with my current arrow set up? I am trying to not buy new arrows, just utilize the extra length on the ones I currently have.
My plan would be to cut from the front and install new gold tip inserts so that i can screw in the desired weights, thus being able to keep all of my 100gr BH and FP.
Current bow:
Mathews Z3
IBO 330 FPS
70lbs
27” draw
Current arrow:
Beeman ICS Patriot
27-3/4” long
9.3 GPI
340 Spine
100gr BH and FP
(3) 2" Blazers
Standard aluminum insert
Lumenock
414g
11.5% FOC
Is my plan achievable with my current arrow set up? I am trying to not buy new arrows, just utilize the extra length on the ones I currently have.
Comment