Tailgate feeder ATV bracket

[PBFrijoles]

I bought a tailgate feeder on sale and decided I wanted to use it on my grizzly. I had 2" square tubing laying around so I got busy and welded up this bracket.
[ATTACH]443389
[ATTACH]443390
[ATTACH]443391
[ATTACH]443392
[ATTACH]443393

[El Coyote]

Tailgate feeder ATV bracket

:thumbup:

[Bill's Unlimited]

Make sure you have something on the inside backing the bolt or it may pull itself off.

A piece of flat bar would work well.

[PBFrijoles]

Tailgate feeder ATV bracket

[ATTACH]443423

Art mentioned that last night so I used one of the brackets it came with.

[austinmike]

looks good what you charge

[Boomerang]

Nice job!

[ATXBowhunter]

I have a similar rig (same brand and size of feeder) for my Polaris but it really bounces around on rough roads and sometimes stops working. Have u experienced this? Anyway good job on the welding!

[PBFrijoles]

Tailgate feeder ATV bracket

I haven't put it to the test yet

[Marine]

Inside that 90 at the bottom. Put a piece of 4"x4", 3/8 plate inside that angle. You'll regret if you don't.

[ccwag2010]

Good work

[PBFrijoles]

Tailgate feeder ATV bracket

Inside that 90 at the bottom. Put a piece of 4"x4", 3/8 plate inside that angle. You'll regret if you don't.

How does it help?

[El Coyote]

Tailgate feeder ATV bracket

How does it help?

50lbs of corn adds a lot of torque to the weld, it might crack over time. I can't remember if I put that brace there or not. Think I just welded 1.5" pipe to top of 2" square tubing. Only cause I had no square tubing left.

[PBFrijoles]

Tailgate feeder ATV bracket

Good call Art. I'll add it this weekend and post a pic.

[msallen]

Nice job!

[PBFrijoles]

Added the support piece on the bracket and went for a test run. I'm very happy with it.
[ATTACH]445503
[ATTACH]445504