View Full Version : 2 3/8 Drill Stem Where To Buy

HandiKap Bowhunter
05-21-2010, 11:30 AM
Im looking for a little over 1000 LF of 2 3/8 drill stem pipe. Aint got to be perfect but will be using them as line post at my sisters place for her horses. HATE T-POST. Anyone know of a good place within a hour or so of the Austin/ San Antonio area I can find some. Right now I have found some for about 1.45 a ft. Just hopeing I could find it a little cheaper.

05-21-2010, 11:48 AM
Thats about the going rate. I paid $1.35 2 wks ago for 60 jts... Hencke's between fredericksburg and Kerrville on Hwy 16 if interested. BTW, good clean pipe

05-21-2010, 11:48 AM
I know of a guy in the College Station area, thats a little farther than an hour for ya but not much... I could give him a call and see what he is getting price wise if ya want... Just let me know!!!

05-21-2010, 11:49 AM
Call PMI in San Antonio...I know they stock used stem. 210-223-7473

05-21-2010, 11:54 AM
Saginaw Pipe or Dixie Pipe both are in Houston area..sorry I am on the road do not have any #'s

HandiKap Bowhunter
05-21-2010, 12:05 PM
Thanks Guys. Cosmiccowboy. That is wher eI got my price from. I was just looking to see if anyone else new any of those secret stashes. Shiner thanks for the info.

05-21-2010, 12:11 PM
You might try The Pipe Ranch in Georgetown.


05-21-2010, 12:23 PM
Try the fence place at 290 and Bell Springs, on the west end of Dripping. I don't know that they have a pile of 2 3/8, but they normally have plenty of used drill stem on hand.

05-21-2010, 01:02 PM
try capital pipe outside of Bertram. Or... try craig's list. I have seen it there as well.

05-21-2010, 03:57 PM
Belton pipe supply.
Just bought some used stem from them a few weeks ago. 1/ft. Cheapest I found. Pipe ranch is high.

05-21-2010, 04:48 PM
Midland/Odessa is at about $1.10 -$1.25 a foot

05-21-2010, 04:51 PM

try here put in your zip

05-21-2010, 07:14 PM
ive got about 500' here in wimberley id let go 1.25'

HandiKap Bowhunter
05-21-2010, 09:28 PM
Loco pm sent.

05-21-2010, 09:49 PM
Just make sure it does not have a PVC liner. Big problems cutting and welding.